[arm-allstar] No test tones from DMK URI

Doug Crompton wa3dsp at gmail.com
Mon Sep 4 14:27:20 EST 2017


 You have discounted that the URI might be bad?

You can set duplex=1 with linktolink=yes
this will result in telelmetry working and you should hear a courtesy tone
and connect message. THis would confirm that the audio out pin 22 is

*73 Doug*


*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Sep 4, 2017 at 1:26 PM, "KD0Q-Glenn via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello list,
> I'm trying to test the URI in my Allstar link setup but not detecting any
> audio on URI pin 22 when I enable a test tone from the simpleusb-tune-menu.
> The configuration is for Allstar to act as a link to an existing PSE-702
> controller.  COS and PTT are working correctly.
> Any ideas?
> Thanks & 73, Glenn - KD0Q
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the arm-allstar mailing list