[arm-allstar] Oddity with two nodes/web transceiver/inbound connects

[Mike - W5JR]

Jim, based on another thread, I changed my bind address from 0.0.0.0 to 127.0.0.1 and my Zoiper would no longer connect. Regular inbound and outbound connections were OK. Zoiper would not complete its "registration" process. I went back to 0.0.0.0 and normalcy returned. 

Maybe a clue for you. 

tnx
Mike / W5JR
Alpharetta GA

sent via my HP95LX 


> On Oct 28, 2017, at 2:41 AM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Jim,
> 
> As was mentioned your log entry is all jumbled and hard to read - try
> resending. Did you change anything in iax.conf? Did you configure an iaxrpt
> password? This is done at setup but you can also add it in the iax.conf
> file in the iaxrpt stanza -  secret=<password>
> 
> Are you trying to do this locally or remotely from outside of your LAN? If
> it is outside you would need to do port forwarding for your iax port which
> defualts to 4569 UPD but could be some other port number if you changed
> it.
> 
> What version of the code are you running?
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> On Sat, Oct 28, 2017 at 12:14 AM, "Jim Aspinwall No1PC via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> I have 2, maybe three nodes, that I may have mis-configured that are not
>> accepting, or at least not properly completing inbound connections, via
>> WebTransceiver, or iaxrpt phone apps - though they show connected in the
>> WebTransceiver GUI, as well as the other outbound node connection made.
>> 
>> I cannot get audio to/from the node via WebTransceiver, nor keyup/Transmit
>> from WebTransceiver.
>> 
>> The 'silently' can connect to other nodes, and pass audio back and forth,
>> and I believe can accept connection from other nodes... but I may be
>> digressing.
>> I have no clue what could be messed up in the typical config files.  Any
>> clues?
>> Verbose output from Asterisk CLI:
>> Asterisk 1.4.23-pre.hamvoip-V1.5.3-14-app_rpt-0.327-07/24/2017, Copyright
>> (C) 1999 - 2017 HamVoIP.org and others.Created by Mark Spencer <
>> markster at digium.com>Asterisk comes with ABSOLUTELY NO WARRANTY; type
>> 'core show warranty' for details.This is free software, with components
>> licensed under the GNU General PublicLicense version 2 and other licenses;
>> you are welcome to redistribute it undercertain conditions. Type 'core show
>> license' for details..===================================================
>> ======================Connected to Asterisk 1.4.23-pre.hamvoip-V1.5.3-14-app_rpt-0.327-07/24/2017
>> currently running on <nodename> (pid = 388)Verbosity was 3 and is now 4
>> -- Hungup 'DAHDI/pseudo-1847790313'    -- Accepting AUTHENTICATED call from
>> <my home IP>:       > requested format = ulaw,       > requested prefs =
>> (ulaw),       > actual format = ulaw,       > host prefs =
>> (g726aal2|ulaw|gsm),       > priority = mine    -- Executing
>> [s at allstar-public:1] Ringing("IAX2/allstar-public-4403", "") in new
>> stack    -- Executing [s at allstar-public:2] Set("IAX2/allstar-public-4403",
>> "RESP=OHYESNO1PC") in new stack    -- Executing [s at allstar-public:3]
>> Set("IAX2/allstar-public-4403", "NODENUM=43157") in new stack    --
>> Executing [s at allstar-public:4] GotoIf("IAX2/allstar-public-4403",
>> "0?hangit") in new stack    -- Executing [s at allstar-public:5]
>> GotoIf("IAX2/allstar-public-4403", "0?hangit") in new stack    --
>> Executing [s at allstar-public:6] GotoIf("IAX2/allstar-public-4403",
>> "0?hangit") in new stack    -- Executing [s at allstar-public:7]
>> Set("IAX2/allstar-public-4403", "CALLSIGN=NO1PC") in new stack    --
>> Executing [s at allstar-public:8] Wait("IAX2/allstar-public-4403", "3") in
>> new stack    -- Executing [s at allstar-public:9]
>> Playback("IAX2/allstar-public-4403", "rpt/node|noanswer") in new stack
>> -- <IAX2/allstar-public-4403> Playing 'rpt/node' (language 'en')    --
>> Executing [s at allstar-public:10] SayDigits("IAX2/allstar-public-4403",
>> "43157") in new stack    -- <IAX2/allstar-public-4403> Playing 'digits/4'
>> (language 'en')    -- <IAX2/allstar-public-4403> Playing 'digits/3'
>> (language 'en')    -- <IAX2/allstar-public-4403> Playing 'digits/1'
>> (language 'en')    -- <IAX2/allstar-public-4403> Playing 'digits/5'
>> (language 'en')    -- <IAX2/allstar-public-4403> Playing 'digits/7'
>> (language 'en')    -- Remote UNIX connection    -- Remote UNIX connection
>> disconnected    -- Executing [s at allstar-public:11]
>> Set("IAX2/allstar-public-4403", "CALLERID(num)=0") in new stack    --
>> Executing [s at allstar-public:12] Set("IAX2/allstar-public-4403",
>> "CALLERID(name)=NO1PC") in new stack    -- Executing [s at allstar-public:13]
>> Rpt("IAX2/allstar-public-4403", "43157|X") in new stack  == Spawn
>> extension (allstar-public, s, 13) exited KEEPALIVE on
>> 'IAX2/allstar-public-4403'barf3*CLI>
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org