[arm-allstar] Oddity with two nodes/web transceiver/inbound connects

[Doug Crompton]

Jim,

 As was mentioned your log entry is all jumbled and hard to read - try
resending. Did you change anything in iax.conf? Did you configure an iaxrpt
password? This is done at setup but you can also add it in the iax.conf
file in the iaxrpt stanza -  secret=<password>

Are you trying to do this locally or remotely from outside of your LAN? If
it is outside you would need to do port forwarding for your iax port which
defualts to 4569 UPD but could be some other port number if you changed
it.

What version of the code are you running?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Oct 28, 2017 at 12:14 AM, "Jim Aspinwall No1PC via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have 2, maybe three nodes, that I may have mis-configured that are not
> accepting, or at least not properly completing inbound connections, via
> WebTransceiver, or iaxrpt phone apps - though they show connected in the
> WebTransceiver GUI, as well as the other outbound node connection made.
>
> I cannot get audio to/from the node via WebTransceiver, nor keyup/Transmit
> from WebTransceiver.
>
> The 'silently' can connect to other nodes, and pass audio back and forth,
> and I believe can accept connection from other nodes... but I may be
> digressing.
> I have no clue what could be messed up in the typical config files.  Any
> clues?
> Verbose output from Asterisk CLI:
> Asterisk 1.4.23-pre.hamvoip-V1.5.3-14-app_rpt-0.327-07/24/2017, Copyright
> (C) 1999 - 2017 HamVoIP.org and others.Created by Mark Spencer <
> markster at digium.com>Asterisk comes with ABSOLUTELY NO WARRANTY; type
> 'core show warranty' for details.This is free software, with components
> licensed under the GNU General PublicLicense version 2 and other licenses;
> you are welcome to redistribute it undercertain conditions. Type 'core show
> license' for details..===================================================
> ======================Connected to Asterisk 1.4.23-pre.hamvoip-V1.5.3-14-app_rpt-0.327-07/24/2017
> currently running on <nodename> (pid = 388)Verbosity was 3 and is now 4
> -- Hungup 'DAHDI/pseudo-1847790313'    -- Accepting AUTHENTICATED call from
> <my home IP>:       > requested format = ulaw,       > requested prefs =
> (ulaw),       > actual format = ulaw,       > host prefs =
> (g726aal2|ulaw|gsm),       > priority = mine    -- Executing
> [s at allstar-public:1] Ringing("IAX2/allstar-public-4403", "") in new
> stack    -- Executing [s at allstar-public:2] Set("IAX2/allstar-public-4403",
> "RESP=OHYESNO1PC") in new stack    -- Executing [s at allstar-public:3]
> Set("IAX2/allstar-public-4403", "NODENUM=43157") in new stack    --
> Executing [s at allstar-public:4] GotoIf("IAX2/allstar-public-4403",
> "0?hangit") in new stack    -- Executing [s at allstar-public:5]
> GotoIf("IAX2/allstar-public-4403", "0?hangit") in new stack    --
> Executing [s at allstar-public:6] GotoIf("IAX2/allstar-public-4403",
> "0?hangit") in new stack    -- Executing [s at allstar-public:7]
> Set("IAX2/allstar-public-4403", "CALLSIGN=NO1PC") in new stack    --
> Executing [s at allstar-public:8] Wait("IAX2/allstar-public-4403", "3") in
> new stack    -- Executing [s at allstar-public:9]
> Playback("IAX2/allstar-public-4403", "rpt/node|noanswer") in new stack
> -- <IAX2/allstar-public-4403> Playing 'rpt/node' (language 'en')    --
> Executing [s at allstar-public:10] SayDigits("IAX2/allstar-public-4403",
> "43157") in new stack    -- <IAX2/allstar-public-4403> Playing 'digits/4'
> (language 'en')    -- <IAX2/allstar-public-4403> Playing 'digits/3'
> (language 'en')    -- <IAX2/allstar-public-4403> Playing 'digits/1'
> (language 'en')    -- <IAX2/allstar-public-4403> Playing 'digits/5'
> (language 'en')    -- <IAX2/allstar-public-4403> Playing 'digits/7'
> (language 'en')    -- Remote UNIX connection    -- Remote UNIX connection
> disconnected    -- Executing [s at allstar-public:11]
> Set("IAX2/allstar-public-4403", "CALLERID(num)=0") in new stack    --
> Executing [s at allstar-public:12] Set("IAX2/allstar-public-4403",
> "CALLERID(name)=NO1PC") in new stack    -- Executing [s at allstar-public:13]
> Rpt("IAX2/allstar-public-4403", "43157|X") in new stack  == Spawn
> extension (allstar-public, s, 13) exited KEEPALIVE on
> 'IAX2/allstar-public-4403'barf3*CLI>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org