[arm-allstar] Oddity with two nodes/web transceiver/inbound connects

[Benjamin Naber]

Jim,

try reposting with your logs in some kind of order. Jumbled together
makes them very hard to read.

Also, include your what .conf files you were playing with, and give
indication as to what you were trying to do.

Usually, not able to accept inbound connections has to do with your
edge router, port forwarding to your node's IP must be correctly
enabled.

If port forwarding has been previously enabled, and you were able
accept inbound connections BEFORE you broke the config files, then yes,
there is an issue with Asterisk, haha.

If nothing else, replace your current .conf files with your backups
(you did make a backup of your .conf files after the node was working,
correct?) and then restart asterisk.

Else, write down your configs from simpleusb_tune_XXXX, and run from
shell firsttime.sh and reconfigure the whole box. Run
simepleubs_tune_menu, and enter the configs you wrote down


~Benjamin, KB9LFZ


On Sat, 2017-10-28 at 04:14 +0000, 
> I have 2, maybe three nodes, that I may have mis-configured that are
> not accepting, or at least not properly completing inbound
> connections, via WebTransceiver, or iaxrpt phone apps - though they
> show connected in the WebTransceiver GUI, as well as the other
> outbound node connection made. 
> 
> I cannot get audio to/from the node via WebTransceiver, nor
> keyup/Transmit from WebTransceiver.
> 
> The 'silently' can connect to other nodes, and pass audio back and
> forth, and I believe can accept connection from other nodes... but I
> may be digressing.
> I have no clue what could be messed up in the typical config files. 
> Any clues?  
> Verbose output from Asterisk CLI:
> Asterisk 1.4.23-pre.hamvoip-V1.5.3-14-app_rpt-0.327-07/24/2017,
> Copyright (C) 1999 - 2017 HamVoIP.org and others.Created by Mark
> Spencer <markster at digium.com>Asterisk comes with ABSOLUTELY NO
> WARRANTY; type 'core show warranty' for details.This is free
> software, with components licensed under the GNU General
> PublicLicense version 2 and other licenses; you are welcome to
> redistribute it undercertain conditions. Type 'core show license' for
> details..============================================================
> =============Connected to Asterisk 1.4.23-pre.hamvoip-V1.5.3-14-
> app_rpt-0.327-07/24/2017 currently running on <nodename> (pid =
> 388)Verbosity was 3 and is now 4    -- Hungup 'DAHDI/pseudo-
> 1847790313'    -- Accepting AUTHENTICATED call from <my home IP>:   
>    > requested format = ulaw,       > requested prefs = (ulaw),     
>  > actual format = ulaw,       > host prefs = (g726aal2|ulaw|gsm),   
>    > priority = mine    -- Executing [s at allstar-public:1]
> Ringing("IAX2/allstar-public-4403", "") in new stack    -- Executing
> [s at allstar-public:2] Set("IAX2/allstar-public-4403",
> "RESP=OHYESNO1PC") in new stack    -- Executing [s at allstar-public:3]
> Set("IAX2/allstar-public-4403", "NODENUM=43157") in new stack    --
> Executing [s at allstar-public:4] GotoIf("IAX2/allstar-public-4403",
> "0?hangit") in new stack    -- Executing [s at allstar-public:5]
> GotoIf("IAX2/allstar-public-4403", "0?hangit") in new stack    --
> Executing [s at allstar-public:6] GotoIf("IAX2/allstar-public-4403",
> "0?hangit") in new stack    -- Executing [s at allstar-public:7]
> Set("IAX2/allstar-public-4403", "CALLSIGN=NO1PC") in new stack    --
> Executing [s at allstar-public:8] Wait("IAX2/allstar-public-4403", "3")
> in new stack    -- Executing [s at allstar-public:9]
> Playback("IAX2/allstar-public-4403", "rpt/node|noanswer") in new
> stack    -- <IAX2/allstar-public-4403> Playing 'rpt/node' (language
> 'en')    -- Executing [s at allstar-public:10] SayDigits("IAX2/allstar-
> public-4403", "43157") in new stack    -- <IAX2/allstar-public-4403>
> Playing 'digits/4' (language 'en')    -- <IAX2/allstar-public-4403>
> Playing 'digits/3' (language 'en')    -- <IAX2/allstar-public-4403>
> Playing 'digits/1' (language 'en')    -- <IAX2/allstar-public-4403>
> Playing 'digits/5' (language 'en')    -- <IAX2/allstar-public-4403>
> Playing 'digits/7' (language 'en')    -- Remote UNIX connection    --
> Remote UNIX connection disconnected    -- Executing [s at allstar-public
> :11] Set("IAX2/allstar-public-4403", "CALLERID(num)=0") in new stack 
>   -- Executing [s at allstar-public:12] Set("IAX2/allstar-public-4403",
> "CALLERID(name)=NO1PC") in new stack    -- Executing [s at allstar-publi
> c:13] Rpt("IAX2/allstar-public-4403", "43157|X") in new stack  ==
> Spawn extension (allstar-public, s, 13) exited KEEPALIVE on
> 'IAX2/allstar-public-4403'barf3*CLI>
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org