[arm-allstar] Full duplex modes

[Mark Johnston]

Why not use Duplex = 0 -No telemetry
or Duplex = 1 which has telemetry... but no repeat audio/ptt

**** North West Hub Allstar Node 2295 <http://www.markjohnston.us/nwhub>
****

"Got Root?"

How many software engineers does it take to change a light bulb?
*None. It's a hardware problem.*

The best way to accelerate a computer running Windows is at 9.81 m/s².

*"I get paid to support Windows, I use Linux to get work done."*


On Thu, Nov 9, 2017 at 5:45 PM, "Irvin Fontanes via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> On 11/9/2017 6:43 PM, James R. Pilgram wrote:
>
>> You left out what you were trying to control.  Please describe your
>> system rig / rigs and interface to your node
>>
>> Jim NH6HI
>>
>>
>>    Original Message
>> From: arm-allstar at hamvoip.org
>> Sent: November 9, 2017 2:37 PM
>> To: arm-allstar at hamvoip.org
>> Reply-to: arm-allstar at hamvoip.org
>> Cc: irvinpr at gmail.com
>> Subject: [arm-allstar] Full duplex modes
>>
>> How do I set up my node to be TRUE full duplex just like a real repeater
>> controller?
>>
>> duplex = 2 repeats audio
>> duplex = 3 does not repeat audio but keys up the xmtr when the rcvr is
>> active (I don't want it to key up the xmtr)
>> duplex = 4 is basically the same as duplex = 2
>>
>> I want duplex = 3 with no repeat audio nor ptt; I want independent +
>> simultaneous receive and transmit.
>>
>> Thanks.
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
> Let me be more specific.
>
> I would like to connect two nodes labeled node 1 (rx1 and tx2) and node 2
> (rx2 and tx2).
> And am needing:
> -rx1 to key up tx2
> and:
> -rx2 to key up tx1
>
> I do not want rx1 to interact with tx1 at all or rx2 to interact with tx2
> at all.
>
> Hopefully this clears any confusion.
>
> Regards,
> Irvin
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>