[arm-allstar] PTT hung with RPi2-3 Version 1.5rc2

[Doug Crompton]

I don't think you mentioned what FOB you were using? DMK-URI or other? Is
the PTT LED light when this happens? If you have another FOB have you tried
it?



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, May 23, 2017 at 4:46 PM, "Joe Prager via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I verified the COS and PTT polarity were correct. Using the V option COS
> functions correctly and clears as expected.  The status page does not
> report the link is in transmit until after the first real key up from
> forcing PTT using Asterisk - CLI.  Then PTT will clear correctly and
> un-key.
>
> Duplex=0 is set because its interfaced to a Link Comm RLC controller and
> utilized for a full duplex link.
>
>
> --
> 73, Joe KG6NRI
>
> On Tue, May 23, 2017 at 1:27 PM, "Chris via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Every time I have any issue with ptt being hung I look at option "v" and
> > see that cos is hung. I invert and bingo
> >
> > > On May 23, 2017, at 4:14 PM, Doug Crompton via arm-allstar <
> > arm-allstar at hamvoip.org> wrote:
> > >
> > > Joe,
> > >
> > > No one I know of has had that problem as long as their setup was
> correct.
> > > Have you gone into simpleusb-tune-menu - Item 12 on the main menu and
> > > checked settings for your radio. If you select the V option the COS
> > should
> > > be normally clear and should show keyed when you transmit TO your node
> > > radio. What node radio are you using?  Duplex=0 as you probably know
> > turns
> > > off all telemetry. If you are using it as a simplex node you would want
> > > duplex=1.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > > On Tue, May 23, 2017 at 2:46 PM, "Joe Prager via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > >> I recently updated to RPi2-3 Version 1.5rc2 (complete format and
> > >> reinstall), and noticed the PTT line gets stuck in transmit upon boot
> of
> > >> the Pi 3 until I 'kerchunk' the system. I can toggle the PTT form the
> > >> asterisk CLI no problem. Is anyone else having this issue?
> > >>
> > >> Interface is a USB sound FOB.
> > >>
> > >> Duplex=0
> > >>
> > >> --
> > >> 73, Joe KG6NRI
> > >> _______________________________________________
> > >>
> > >> arm-allstar mailing list
> > >> arm-allstar at hamvoip.org
> > >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >>
> > >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>