[arm-allstar] PTT hung with RPi2-3 Version 1.5rc2

[Chris]

Every time I have any issue with ptt being hung I look at option "v" and see that cos is hung. I invert and bingo

> On May 23, 2017, at 4:14 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Joe,
> 
> No one I know of has had that problem as long as their setup was correct.
> Have you gone into simpleusb-tune-menu - Item 12 on the main menu and
> checked settings for your radio. If you select the V option the COS should
> be normally clear and should show keyed when you transmit TO your node
> radio. What node radio are you using?  Duplex=0 as you probably know turns
> off all telemetry. If you are using it as a simplex node you would want
> duplex=1.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> On Tue, May 23, 2017 at 2:46 PM, "Joe Prager via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> I recently updated to RPi2-3 Version 1.5rc2 (complete format and
>> reinstall), and noticed the PTT line gets stuck in transmit upon boot of
>> the Pi 3 until I 'kerchunk' the system. I can toggle the PTT form the
>> asterisk CLI no problem. Is anyone else having this issue?
>> 
>> Interface is a USB sound FOB.
>> 
>> Duplex=0
>> 
>> --
>> 73, Joe KG6NRI
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org