[arm-allstar] PTT hung with RPi2-3 Version 1.5rc2

[Doug Crompton]

Joe,

 No one I know of has had that problem as long as their setup was correct.
Have you gone into simpleusb-tune-menu - Item 12 on the main menu and
checked settings for your radio. If you select the V option the COS should
be normally clear and should show keyed when you transmit TO your node
radio. What node radio are you using?  Duplex=0 as you probably know turns
off all telemetry. If you are using it as a simplex node you would want
duplex=1.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, May 23, 2017 at 2:46 PM, "Joe Prager via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I recently updated to RPi2-3 Version 1.5rc2 (complete format and
> reinstall), and noticed the PTT line gets stuck in transmit upon boot of
> the Pi 3 until I 'kerchunk' the system. I can toggle the PTT form the
> asterisk CLI no problem. Is anyone else having this issue?
>
> Interface is a USB sound FOB.
>
> Duplex=0
>
> --
> 73, Joe KG6NRI
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>