[arm-allstar] Disable DTMF muting?

[David McGough]

Hi again.

Please disregard my previous message---propagate_dtmf DOES indeed work
properly.  I had messed up a macro due to a typo at my end.  OOPS!

Note that to activate the DTMF propagation, you must send a DTMF command
sequence to the remotely connected node.

So, for example, if your local node is 1100 and you connect to the remote
node 1200 (*31200 entered locally). Then, you want to send DTMF sequences
to the remote end, you must locally enter: *41200 (where the 1200 is the
remote node number)...Now, ALL DTMF and commands get forwarded to node
1200...Once you're finished, locally enter a: # DTMF symbol to de-activate
remote command mode.

To further enhance this capability, you can use the inxlat and outxlat 
directives to forms DTMF macros.

Please give this method a try...


73, David KB4FXC



On Sun, 7 May 2017, "David McGough via arm-allstar" wrote:

> 
> Hi Justin,
> 
> I tested propagate_dtmf just now and am confirming that something does not
> seem to be working as expected, I'm basically seeing the same results you
> are....I know this functionality -did- work, I'm not sure what might have
> changed.
> 
> I'll investigate this further and report back.
> 
> 
> 73, David KB4FXC
> 
> 
> 
> On Sun, 7 May 2017, "Justin Reed via arm-allstar" wrote:
> 
> > No, it mutes any sequence.
> > 
> > The muting functionality is somewhere in the code, otherwise the audio 
> > would pass uninterrupted.
> > What I'm wondering is where is the kill switch on the muting? Surely 
> > there is some way to just disable it.
> > 
> > Justin
> > NV8Q
> > 
> > 
> > On 5/7/2017 7:04 PM, "Doug Crompton via arm-allstar" wrote:
> > > Is it possible that you are using a "*" at the beginning or in the
> > > sequence? This would tag it as an asterisk command and it would not pass
> > > through. If you must send a "*" then you would have to change the Allstar
> > > leadin character.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > > On Sun, May 7, 2017 at 7:43 PM, "Justin Reed via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > 
> > _______________________________________________
> > 
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > 
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > 
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>