[arm-allstar] Disable DTMF muting?

[Justin Reed]

This is not what I'm asking at all.

I'm not interested in DTMF regeneration or forwarding.

I want to know how to make the nodes pass the audio during DTMF key 
presses just like it passes voice.

No muting of the digits at all, ever.

Can this be done?
Justin


On 5/7/2017 8:26 PM, "David McGough via arm-allstar" wrote:
> Hi again.
>
> Please disregard my previous message---propagate_dtmf DOES indeed work
> properly.  I had messed up a macro due to a typo at my end.  OOPS!
>
> Note that to activate the DTMF propagation, you must send a DTMF command
> sequence to the remotely connected node.
>
> So, for example, if your local node is 1100 and you connect to the remote
> node 1200 (*31200 entered locally). Then, you want to send DTMF sequences
> to the remote end, you must locally enter: *41200 (where the 1200 is the
> remote node number)...Now, ALL DTMF and commands get forwarded to node
> 1200...Once you're finished, locally enter a: # DTMF symbol to de-activate
> remote command mode.
>
> To further enhance this capability, you can use the inxlat and outxlat
> directives to forms DTMF macros.
>
> Please give this method a try...
>
>
> 73, David KB4FXC
>
>
>
> On Sun, 7 May 2017, "David McGough via arm-allstar" wrote:
>