[arm-allstar] Disable DTMF muting?

[Pierre Martel]

Local muting is not the same as propagate dtmf to another node. In fact the
dtmf sequence is regenerated from out-of-band signalling (data sent with
the voice packet in the IAX protocol. this cant work in a sip connection.
So if you did a sip connection between your 2 node it will never work, same
if there is a sip link in anyway between your 2 nodes..

2017-05-07 20:24 GMT-04:00 "Justin Reed via arm-allstar" <
arm-allstar at hamvoip.org>:

> No, it mutes any sequence.
>
> The muting functionality is somewhere in the code, otherwise the audio
> would pass uninterrupted.
> What I'm wondering is where is the kill switch on the muting? Surely there
> is some way to just disable it.
>
> Justin
> NV8Q
>
>
> On 5/7/2017 7:04 PM, "Doug Crompton via arm-allstar" wrote:
>
>> Is it possible that you are using a "*" at the beginning or in the
>> sequence? This would tag it as an asterisk command and it would not pass
>> through. If you must send a "*" then you would have to change the Allstar
>> leadin character.
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>> On Sun, May 7, 2017 at 7:43 PM, "Justin Reed via arm-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>