[arm-allstar] Disable DTMF muting?

[Tim Sawyer]

I sorta remember that propagate_dtmf worked for remote bases only.

On Sun, May 7, 2017 at 5:32 PM, "David McGough via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Hi Justin,
>
> I tested propagate_dtmf just now and am confirming that something does not
> seem to be working as expected, I'm basically seeing the same results you
> are....I know this functionality -did- work, I'm not sure what might have
> changed.
>
> I'll investigate this further and report back.
>
>
> 73, David KB4FXC
>
>
>
> On Sun, 7 May 2017, "Justin Reed via arm-allstar" wrote:
>
> > No, it mutes any sequence.
> >
> > The muting functionality is somewhere in the code, otherwise the audio
> > would pass uninterrupted.
> > What I'm wondering is where is the kill switch on the muting? Surely
> > there is some way to just disable it.
> >
> > Justin
> > NV8Q
> >
> >
> > On 5/7/2017 7:04 PM, "Doug Crompton via arm-allstar" wrote:
> > > Is it possible that you are using a "*" at the beginning or in the
> > > sequence? This would tag it as an asterisk command and it would not
> pass
> > > through. If you must send a "*" then you would have to change the
> Allstar
> > > leadin character.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > > On Sun, May 7, 2017 at 7:43 PM, "Justin Reed via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>



-- 
--
Tim