[arm-allstar] Radio transmission issues

Nathaniel Biser kc3hoz at gmail.com
Thu May 4 22:13:21 EST 2017


Doug,

I can hear myself crisp and clear when I call the 888s from my HT.

I am using the latest 1.5 version of hamvoip.

Your help is extremely appreciated!

-Nate
KC3HOZ
On Thu, May 4, 2017 at 10:09 PM "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Nate,
>
>  The first thing you need to do if you have not already is turn the volume
> up on the 888 and assuming you did not disconnect the speaker see if you
> can hear yourself clearly there when you talk to it from your handheld.
> That receive audio on the 888 is what goes out over the Internet so if that
> is not good then it obviously will not be good over the internet.
>
> If you have good clean audio there then we can go on to troubleshoot
> further. I assume you are using hamvoip version 1.5 software?
>
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Thu, May 4, 2017 at 9:15 PM, "Nathaniel Biser via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have set up a node on a rpi3 using a URIx and a Beofeng 888s.  I
> believe
> > I have it soldered/wired right as the pi can key up the radio and unkey,
> I
> > hear the automated voice tell the date, time etc.  I can use my phone and
> > connect to the node and hear myself come though to the node radio great.
> >
> >
> > The only show stopping issue I have is that when someone is connected to
> > the node, and when I try to transmit from my HT (which is in simplex to
> the
> > radio attached to the node mind you) the other person can't hear me, or
> > complains about choppy audio.  I have tested this myself with my node and
> > using the echolink app on my phone.  I can hear myself very clear when I
> > talk on my phone,  but when I transmit/respond on my HT, it comes through
> > my phone as choppy at best, and nothing at worst.
> >
> > I played with the simpletune-USB option and tried to tune my radio but it
> > doesn't seem to do much of anything to improve my problem.
> >
> > Any ideas?
> >
> > -Nate
> > KC3HOZ
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>


More information about the arm-allstar mailing list