[arm-allstar] Echolink issue

[Doug Crompton]

Justin,

  The problem with Echolink loading  was fixed in an update on Saturday
evening. I trust you have updated since then. The fact that you are being
seen in the status server is a good indication your system is working
assuming that is coming from your Allstar server.

You did not mention but if you are new to Echolink you do have to port
forward a couple of ports to your Allstar server and you can only run one
Echolink instance behind a single public IP. That is you cannot have
Echolink running This is an Echolink restriction. Also you must have
defined a PW for and setup the -L or -R calls. That is you must become a
sysop on a Windows instance of Echolink then defined your password for -L
and/or -R. You may already know all this but if not I wanted to pass it on.

If Echolink is working you should see the database in the client. Enter the
Asterisk client - item 11 in the admin menu - and type -

echolink dbdump

you should see a bunch of calls go by. To see a specific call type -

wa3dsp-27225-hub*CLI> echolink dbget c K0JWH-R
Error: Entry for K0JWH-R not found!

wa3dsp-27225-hub*CLI> echolink dbget c WA3DSP-L
147090|WA3DSP-L|67.165.29.63

as you can see your info, if you are online, did not appear while mine did.

See the echolink howto at the hamvoip.org web page.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Jan 30, 2017 at 8:53 PM, "Justin Reed via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I'm trying to get Echolink working on v1.5 and having trouble. The node
> shows up in the Echolink status page on the website (K0JWH-R) but cannot be
> found by phone or PC clients as being online.
>
> In modules.conf I have: ;noload=chan_echolink.so
>
> which I believe the semicolon means that it will load.
>
> Here is my echolink.conf:
>
> [el0]
> confmode=no
> call=K0JWH-R
> pwd=hidden
> name=Jordan
> qth=El Dorado, KS
> email=repeaters at ks0lnk.net
> maxstns=20
> rtcptimeout=10
> node=453405
> recfile=/tmp/recorded.gsm
> astnode=42640
> context=radio-secure
> server1=naeast.echolink.org
> server2=nasouth.echolink.org
> server3=nawest.echolink.org
> server4=backup.echolink.org
> freq=443.100
> tone=162.2
> lat=37.896814
> lon=-96.932866
> power=9
> height=5
> gain=6
> dir=0
> ;deny=
> ;permit=
>
>
> Any other place where Echolink has to be enabled?
>
> Thanks,
> Justin
> NV8Q
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>