[arm-allstar] WiFi No password problem

[Doug Crompton]

Jim,

 Also you did not mention, but does it work to this same router when you do
have a pass phrase with this SSID?



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Wed, Jan 11, 2017 at 10:21 AM, "James R. Pilgram via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>  I'm trying to setup my Pi3 without a password on an open wifi network to
> no avail.  Works great on any network with a password. Not at all with no
> password.
>
> I run the wireless-setup.sh, it finds the open Network,  I select it, it
> asks for a password and text says enter blank for open network. I assume
> this should say leave blank but I've even tried to enter blank which it
> won't accept.
> I leave it blank and select OK. Get No password entered assuming open site.
> Select OK. Says adding "open" no passphrase site with SSID =
> "KPS_ASUS_INDOORS" - OK to add. Select yes and it goes to the command
> prompt just like it does when I enter a password. Never get the
> instructions to remove ethernet connection but I've set up enough of these
> to know how it's supposed to work. Remove the ethernet cable and reboot and
> it fails to connect. Plug in the ethernet and it responds to the old IP
> address via putty.
>
> I've even re-ran the wifi install script again to be sure it actuality got
> in right.
>
> Run nano /etc/wpa_supplicant/wpa_supplicant_custom-wlan0.conf and the file
> is empty.
>
> Setup with a password and there's text in the file.
>
> I'm stumped.
>
> Jim NH6HI
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>