[arm-allstar] New node, audio problem

[Justin Reed]

On 2/27/2017 11:49 PM, "Doug Crompton via arm-allstar" wrote:
> Justin,
>
>   The same audio comes out on both channels. We normally use A but if you
> hooked it up to B that is OK you just have to set the levels with B in
> simpleusb-tune-menu. Pin 22 on the URI is correct for Channel A. You have
> set the A level in simpleusb-tune-menu?  Perhaps try switching in another
> FOB to see if that is the problem.
I have the output of A turned up to 700 and there is no output. B is 
still at the default 500. I'm wondering if I moved to pin 23 if maybe 
the audio would work there. The URI schematic looks like there are no 
shared components after the chip so maybe it's worth a shot. I was 
hoping my second install would be easier than the first ;)

I have another URI on the way, should be here this week. Hopefully it's 
as simple as that.
Thanks,
Justin