[arm-allstar] Will not show busy in iaxrpt

[Doug Crompton]

I do not understand what you are seeing. iaxrpt only shows busy if you try
to connect while a channel is busy otherwise it displays OK. Even if it
says busy it still connects. If it connects why does it matter what it
says. This has absolutely nothing to do with the image. This is an iax
connect like any other iax connect which is what we use for Allstar. If you
can't connect you have something configured wrong.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Feb 20, 2017 at 6:23 PM, "aduarte Systems Admin via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
>
> Strangely this happen again after i setup the wifi and a few other
> things not sure what happen.. may have to re-image and start over...
>
> My other node you can see "busy set call =1" then "busy clr call =1"
> within the iaxrpt windows program log..... on this node you dont see the
> set just the clear...
>
> On 2017-02-10 19:39, "James R. Pilgram via arm-allstar" wrote:
>
> > If you connect the IaxRpt to your node and there is a keyed up
> condition, it will show "BUSY" instead of OK until the key-up condition
> clears. . Somehow I think this is part of the elusive Scan function from
> IaxRpt's previous life.
> > Jim NH6HI
> >
> > Original Message
> > From: arm-allstar at hamvoip.org
> > Sent: February 10, 2017 14:18
> > To: arm-allstar at hamvoip.org
> > Reply-to: arm-allstar at hamvoip.org
> > Cc: wa3dsp at gmail.com
> > Subject: Re: [arm-allstar] Will not show busy in iaxrpt
> >
> > Tony,
> >
> > If you are using the Windows iaxrpt there is no busy indication in the
> > iaxrpt window other than the transmit icon lighting up red when you
> select
> > it. You will also see audio levels in the mic bar graph at the top. On RX
> > you will also see bar graph indication but nothing else. Is that what you
> > are referring to?
> >
> > Is it connecting? Do you get an OK for state in the status screen when
> you
> > connect?
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio [3] <http://www.crompton.com/hamradio
> [3]>*
> >
> > On Fri, Feb 10, 2017 at 5:49 PM, "Aduarte via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> Anyone know what could be wrong if a node doesn't show busy when its
> sending audio in iaxrpt? Not sure what i did wrong Thanks! Tony
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-
> bin/mailman/listinfo/arm-allstar [1] Visit the BBB and RPi2/3 web page -
> http://hamvoip.org [2]
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar [1]
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org [2]
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar [1]
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org [2]
>
> --
>
> ANTONE D DUARTE JR
> _Sr Systems Administrator_
> Town of Acushnet
> Office of Emergency Management
> Phone: 1-508-998-0295 Ext 204
> Fax: 1-914-352-1885
> www.acushnetema.com/helpdesk [4]
>
>
> Links:
> ------
> [1] http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> [2] http://hamvoip.org
> [3] http://www.crompton.com/hamradio
> [4] http://acushnetema.com/helpdesk
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>