[arm-allstar] DTMF Tones

[Larry]

Kerry,

Give the group a bit more detail about your situation...

If you're new to Allstar there may be those who assume many people are 
past the initial learning curve which isn't always the case.

What version of Allstar are you running?
Is the software the hamvoip version or Dial Version?
How did you access your node to configure it? Using direct connections 
to the Pi2 or a network connection on your local network?
Since you mentioned control via a Web Interface what operating system 
are you using? Linux or Windows?
Are you currently able to login to the node and get to a command line 
prompt?
What is your node number?

A little more info makes a difference in what people send on here to 
assist you. Especially if you are new to all this.

Larry - N7FM
Node 29018



On 12/29/2017 09:36 PM, "Larry via arm-allstar" wrote:
> Kerry,
>
> If controlling means dialing a connection.... or sending commands? I 
> must ask are you prefacing the dtmf tones you are sending with a "*" ?
>
> Like *3XXXXX to connect to a node in the tranceive mode. (Replace 
> XXXXX with a node number)  or  send *81 for time playback?
>
> Larry - N7FM
>
> On 12/29/2017 09:08 PM, "Kerry McKenzie via arm-allstar" wrote:
>> Hi All
>> Have spent considerable time with little success I am unable to 
>> control my
>> node via DTMF Tones
>> The configuration is raspberry pi2 with a DMK URLx controller 
>> connected to
>> a Hytera node radio model MD6652
>> I am trying to figure if the tones are not being decoded in the radio 
>> or in
>> the node itself.
>>
>> I might be able to work around this if i new how to control the Pi 
>> from the
>> web inteface on the website but i can not
>> find how to control the node this way either.
>>
>> I have tried sending tones from two icom radios, a Baofeng radio.
>>
>> Sorry cannot be more specific but the tone are passing through the node
>> radio(Hytera) as i can hear them in the speaker.
>> Are there any settings i may have missed or has anyone else experienced
>> this and if so how did you remedy it.
>> thanks Kerry VK4TUB
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org