[arm-allstar] DTMF Tones

[Larry]

Kerry,

If controlling means dialing a connection.... or sending commands? I 
must ask are you prefacing the dtmf tones you are sending with a "*" ?

Like *3XXXXX to connect to a node in the tranceive mode. (Replace XXXXX 
with a node number)  or  send *81 for time playback?

Larry - N7FM

On 12/29/2017 09:08 PM, "Kerry McKenzie via arm-allstar" wrote:
> Hi All
> Have spent considerable time with little success I am unable to control my
> node via DTMF Tones
> The configuration is raspberry pi2 with a DMK URLx controller connected to
> a Hytera node radio model MD6652
> I am trying to figure if the tones are not being decoded in the radio or in
> the node itself.
>
> I might be able to work around this if i new how to control the Pi from the
> web inteface on the website but i can not
> find how to control the node this way either.
>
> I have tried sending tones from two icom radios, a Baofeng radio.
>
> Sorry cannot be more specific but the tone are passing through the node
> radio(Hytera) as i can hear them in the speaker.
> Are there any settings i may have missed or has anyone else experienced
> this and if so how did you remedy it.
> thanks Kerry VK4TUB
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>