[arm-allstar] No audio to Broadcastify using ezstream

[Chris Perrine(KB2FAF)]

Thanks!


Chris

KB2FAF



On 12/22/2017 11:10 AM, "Steve Agee via arm-allstar" wrote:
> For Crompton PI Distro, use the following in rpt.conf
>
> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 24 --highpass 0.2 
> -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status | 
> /usr/local/bin/ezstream -c /etc/ezstream.xml
>
> Above courtesy of K6KYA who helped me tweak mine and it works fine now.
>
> Thanks,
> N5ZUA
>
> On 12/22/2017 10:01 AM, "Chris Perrine(KB2FAF) via arm-allstar" wrote:
>> Hi,
>>
>>
>> Let me first mention that I have had this successfully working for 
>> many years with ACID so I know my xml file and other set up is correct.
>>
>>
>> What I can't figure out is why it won't work from my pi 3. Latest 
>> ezstream compiled with all the prerequisites etc.  It will connect to 
>> broadcastify and say online but no audio and what appears to be no 
>> recognition of sample rate, bit rate, etc on the feed statistics page.
>>
>>
>> I can not find any errors in log files.  Read through the how to on 
>> the hamvoip site.  Has something changed with version 1.5 since the 
>> how to was written?
>>
>>
>> Thanks for the help!
>>
>>
>> Chris
>>
>> KB2FAF
>>
>>
>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org