[arm-allstar] Odd Issue With Hamvoip 1.5 - Yaesu FT-8800R and Baofeng GT-3TP

[Chris Souleles]

I just had a similar problem with a node using a Yaesu FT-7900.  I could decode tones from all my radios except my Icom 7000.  I turned off the de-emphasis in the node and now it works fine with all radios including the IC-7000.  Chris - W6CS - 73.

      From: Stephen Cook via arm-allstar <arm-allstar at hamvoip.org>
 To: arm-allstar at hamvoip.org 
Cc: Stephen Cook <va3kxp at yahoo.com>
 Sent: Saturday, December 9, 2017 3:03 PM
 Subject: [arm-allstar] Odd Issue With Hamvoip 1.5 - Yaesu FT-8800R and Baofeng GT-3TP
   
Good evening,

I’m hoping someone out there has an idea of what I should look for. I have setup an AllStarLink node using the latest Hamvoip 1.5 image, a URIx, and a Yaesu FT-8800R Radio.  Everything’s works, except I cannot make a connection through the AllStarLink node using a Baofeng GT-3TP.  Looking at the Asterisk CLI I can see every DTMF tone sent is decoded, EXCEPT the “3”.  Asterisk just doesn’t seem to see or decode the DTMF tone for the “3” Key. I have tried 2 different Baofeng GT-3TP’s, no difference.  Now the really odd thing is using a Yaesu FT-2DR, all the DTMF tones decode.  Also using an Alinco DJ 175 the tones are being decoded properly as well. 

I initially thought there was something wrong with the Baofengs, but I have used the same Baofengs through a Yaesu DR-1X repeater to a different AllStarLink node and it works fine.

Any ideas on what to look for would be appreciated. 

Thank you and 73,

Stephen
va3kxp
va3kxp at yahoo.com

Sent from my iPad Air
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org