[arm-allstar] Odd Issue With Hamvoip 1.5 - Yaesu FT-8800R and Baofeng GT-3TP

[Doug Crompton]

In addition to Tim's suggestions make sure your levels are correct. In
simpleusb-tune-menu item 2 - peaks to 5-6 Khz with voice.

The settings in simpleusb-tune-menu are dynamic in that they change
immediately. So you can change de-emphasis and other settings and see what
happens on the fly.

Also see this -

https://kk6jyt.com/sending-accurate-baofeng-dtmf-tones-from-the-uv-5r/

This is often a problem with Baofeng radios.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Sat, Dec 9, 2017 at 6:03 PM, "Stephen Cook via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Good evening,
>
> I’m hoping someone out there has an idea of what I should look for. I have
> setup an AllStarLink node using the latest Hamvoip 1.5 image, a URIx, and a
> Yaesu FT-8800R Radio.  Everything’s works, except I cannot make a
> connection through the AllStarLink node using a Baofeng GT-3TP.  Looking at
> the Asterisk CLI I can see every DTMF tone sent is decoded, EXCEPT the
> “3”.  Asterisk just doesn’t seem to see or decode the DTMF tone for the “3”
> Key. I have tried 2 different Baofeng GT-3TP’s, no difference.  Now the
> really odd thing is using a Yaesu FT-2DR, all the DTMF tones decode.  Also
> using an Alinco DJ 175 the tones are being decoded properly as well.
>
> I initially thought there was something wrong with the Baofengs, but I
> have used the same Baofengs through a Yaesu DR-1X repeater to a different
> AllStarLink node and it works fine.
>
> Any ideas on what to look for would be appreciated.
>
> Thank you and 73,
>
> Stephen
> va3kxp
> va3kxp at yahoo.com
>
> Sent from my iPad Air
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org