[arm-allstar] Odd Issue With Hamvoip 1.5 - Yaesu FT-8800R and Baofeng GT-3TP

[Tim Sawyer]

 Two possibilities come to mind.  If your Baofeng’s are encoding PL be sure
you have the PL filter turned enabled on your node. The other thing is
deemphasis. If your node sounds tinny or bassey to users on connected nodes
then you may need to change your deemphasis.

On Sat, Dec 9, 2017 at 3:03 PM "Stephen Cook via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Good evening,
>
> I’m hoping someone out there has an idea of what I should look for. I have
> setup an AllStarLink node using the latest Hamvoip 1.5 image, a URIx, and a
> Yaesu FT-8800R Radio.  Everything’s works, except I cannot make a
> connection through the AllStarLink node using a Baofeng GT-3TP.  Looking at
> the Asterisk CLI I can see every DTMF tone sent is decoded, EXCEPT the
> “3”.  Asterisk just doesn’t seem to see or decode the DTMF tone for the “3”
> Key. I have tried 2 different Baofeng GT-3TP’s, no difference.  Now the
> really odd thing is using a Yaesu FT-2DR, all the DTMF tones decode.  Also
> using an Alinco DJ 175 the tones are being decoded properly as well.
>
> I initially thought there was something wrong with the Baofengs, but I
> have used the same Baofengs through a Yaesu DR-1X repeater to a different
> AllStarLink node and it works fine.
>
> Any ideas on what to look for would be appreciated.
>
> Thank you and 73,
>
> Stephen
> va3kxp
> va3kxp at yahoo.com
>
> Sent from my iPad Air
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

-- 
--
Tim