[arm-allstar] Odd Issue With Hamvoip 1.5 - Yaesu FT-8800R and Baofeng GT-3TP

[Stephen Cook]

Good evening,

I’m hoping someone out there has an idea of what I should look for. I have setup an AllStarLink node using the latest Hamvoip 1.5 image, a URIx, and a Yaesu FT-8800R Radio.  Everything’s works, except I cannot make a connection through the AllStarLink node using a Baofeng GT-3TP.  Looking at the Asterisk CLI I can see every DTMF tone sent is decoded, EXCEPT the “3”.  Asterisk just doesn’t seem to see or decode the DTMF tone for the “3” Key. I have tried 2 different Baofeng GT-3TP’s, no difference.  Now the really odd thing is using a Yaesu FT-2DR, all the DTMF tones decode.  Also using an Alinco DJ 175 the tones are being decoded properly as well. 

I initially thought there was something wrong with the Baofengs, but I have used the same Baofengs through a Yaesu DR-1X repeater to a different AllStarLink node and it works fine.

Any ideas on what to look for would be appreciated. 

Thank you and 73,

Stephen
va3kxp
va3kxp at yahoo.com

Sent from my iPad Air