[arm-allstar] dtmf tones

[HAL Fisher]

I have not changed anything in the rpt.conf file. I did not know anything about that file let alone change anything. lol     

Doug we talked the other day on the repeater on my way to work on Tuesday or so. Anyhow when I hit the DTMF pads those lines come up yes each and every one of them. 

so where does one go from here?


Thanks 
Hal
de N2FI

> On August 28, 2017 at 9:33 AM "Doug Crompton via arm-allstar" <arm-allstar at hamvoip.org> wrote:
> 
> 
> Hal,
> 
> Just to confirm, you are seeing the correct DTMF for each key you press on
> the radio in the Asterisk client?? It should look like this (order does not
> matter) -
> 
> [Aug 28 09:29:30] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 1
> [Aug 28 09:29:31] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 2
> [Aug 28 09:29:32] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 3
> [Aug 28 09:29:33] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 4
> [Aug 28 09:29:33] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 5
> [Aug 28 09:29:34] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 6
> [Aug 28 09:29:35] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 7
> [Aug 28 09:29:35] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 8
> [Aug 28 09:29:36] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 9
> [Aug 28 09:29:37] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char *
> [Aug 28 09:29:38] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char 0
> [Aug 28 09:29:38] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char #
> [Aug 28 09:29:38] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char #
> [Aug 28 09:29:39] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char A
> [Aug 28 09:29:40] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char B
> [Aug 28 09:29:41] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char C
> [Aug 28 09:29:42] NOTICE[12250]: chan_simpleusb.c:2438 simpleusb_read: Got
> DTMF char D
> 
> If you are getting that and you have not changed anything in the rpt.conf
> functions section or directed the functions to the wrong place in the
> rpt/conf node section it should certainly work. Have you changed anything
> from the setup in your rpt.conf file?
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> 
> On Mon, Aug 28, 2017 at 5:55 AM, "HAL Fisher via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
> > Hi,
> >
> >
> > I setup an IC2100h with a URI and pi3 I have a cor signal and am using the
> > mic from the rj45 and ext speaker  for my inputs and ptt. I cannot get the
> > DTMF tones to execute they are being seen by the asterisk client but not
> > executing.
> >
> >
> > When I  enter  the commands
> >
> >
> > RPT FUN <nodemname> <*81> or any command it will execute them manually.
> >
> >
> > I have changed the audio input levels every 100 -999
> >
> > I have also pre and de emphasized it  with no luck.
> >
> >
> > What am I missing???
> >
> >
> > is there any clue
> >
> >
> > Thanks
> >
> > Hal
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org