[arm-allstar] Weard Windows 10

[Chris Viningre]

New information from my friend. Windows is on one hard drive and Linux is
on another. Maybe the interference is coming from the drive that Windows is
on?

On Aug 16, 2017 2:57 AM, "Chris Viningre" <chrisviningre at gmail.com> wrote:

> I'm still cofused. No radios keyed up or transmitting. One computer using
> the same monitor and keyboard. Two partisans, one for Windows and the other
> for Linux. The fob and node radio is one of my 8 nodes that I have
> susessfully built running in a very high rf area around HF radios at full
> legal limit power. Nodes are setup with outside or remote antenns. The only
> time this node keys up abnormally is when the computer is running windows.
> Not when it's running Linux. This is when I saw a signal on the receiving
> only radios. I know this is weard.
>
> David, is it possible that windows is using something different or
> differently than Linux that could cause a modulated signal?
>
> On Aug 16, 2017 1:57 AM, Terry Bethlehem via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
>
>> Yes, being very near to a pc, with a radio, can hammer the radio's front
>> end. Some pcs are worse than others. Getting the radio away, as much as
>> possible, helps a lot.
>>
>> On Aug 16, 2017 3:47 AM, David McGough via arm-allstar <
>> arm-allstar at hamvoip.org> wrote:
>>
>> >
>> > Hi,
>> >
>> >
>> > Well, Win10 itself obviously won't generate RFI.  However, there are
>> > possible situations where a PC can generate nasty RFI due to how the OS
>> is
>> > utilizing the hardware. One scenario is where you have a RFI noisy video
>> > card in the PC.  I know of an installation many years ago where
>> "upgraded"
>> > computers partly knocked a municipal airport's communications off the
>> air
>> > due to crazy noise from the VGA video cards! As part of the upgrade, the
>> > video cards got switched to a higher resolution, generating VHF spurs
>> in a
>> > very bad spot!
>> >
>> > So, check all the peripherals plugged into the PC as a first step. And,
>> > check the PC power supply, etc.
>> >
>> >
>> > 73, David KB4FXC
>> >
>> >
>> >
>> > On Wed, 16 Aug 2017, "Chris Viningre via arm-allstar" wrote:
>> >
>> > > We experienced a weird issue yesterday that I'm hoping someone could
>> > share
>> > > some light on. I was helping a friend set up Supermon on his node.I
>> was
>> > > showing him the features. When I was showing him lsnode and had him
>> login
>> > > on 27225 so he would be able to see the list of nodes.Thats when all
>> hell
>> > > broke loose. I heard a delay on login into the node on his radio. I
>> then
>> > > heard the dubble beep over and over. I knew something was going
>> wrong. As
>> > > he was shutting down the windows computer and I was going to shutdown
>> the
>> > > node radio and pi3, I saw a fluxurating signal on the operating radio
>> as
>> > > well as a green light receive signal on the node radio, a 888. When
>> > windows
>> > > was off there were no signal on either radio other then Doug seeing
>> the
>> > > problem was from us. Sorry Doug. My friend ran Linux on the same
>> computer
>> > > and it gave us no problems. My question is. Does anyone know of
>> Windows
>> > > emitting RFI on UHF that's capable of a 107.2 hz pl tone?
>> > > _______________________________________________
>> > >
>> > > arm-allstar mailing list
>> > > arm-allstar at hamvoip.org
>> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> > >
>> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> > >
>> >
>> > _______________________________________________
>> >
>> > arm-allstar mailing list
>> > arm-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >
>> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> >
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>