[arm-allstar] Motorola GM300 Channel Steering

[Josh - Muscle Shoals Productions]

Will check it out in the morning Doug... Thanks again 73
W4ZZK  Josh
On Aug 11, 2017 12:00 AM, Doug Crompton via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> Josh,
>
>  I sent out a bash script awhile back that does that. It uses 4 or 5 lines
> in BCD format giving  total of 16 or 32 channels. I am not at my home QTH
> right now but if you search back about two weeks in the archives you should
> find it. If not remind me next week and I will send it again.
>
> It would allow a DTMF sequence to select a channel by calling the script
> with a command code and channel number.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Thu, Aug 10, 2017 at 11:45 PM, "Josh Hatton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hi All
> > Just wondering if anyone has done Channel Steering for Motorola GM300
> > Radios with the RPi/Allstar Combo? I recall maybe 5 pins on the accessory
> > connector makes this happen....
> >
> > If you have been successful with this, would you share your how-to with
> > me?  I am aiming to use a pair of GM300s (One VHF &One UHF) to build a
> > remote base node.
> >
> > Thank you very much es 73
> >
> > Josh W4ZZK
> > NW AL
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>