[arm-allstar] Motorola GM300 Channel Steering

[Doug Crompton]

Josh,

 I sent out a bash script awhile back that does that. It uses 4 or 5 lines
in BCD format giving  total of 16 or 32 channels. I am not at my home QTH
right now but if you search back about two weeks in the archives you should
find it. If not remind me next week and I will send it again.

It would allow a DTMF sequence to select a channel by calling the script
with a command code and channel number.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Thu, Aug 10, 2017 at 11:45 PM, "Josh Hatton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi All
> Just wondering if anyone has done Channel Steering for Motorola GM300
> Radios with the RPi/Allstar Combo? I recall maybe 5 pins on the accessory
> connector makes this happen....
>
> If you have been successful with this, would you share your how-to with
> me?  I am aiming to use a pair of GM300s (One VHF &One UHF) to build a
> remote base node.
>
> Thank you very much es 73
>
> Josh W4ZZK
> NW AL
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>