[arm-allstar] TX loop

[Stanley Stanukinos]

Bryan, let me see if I am understanding you correctly. You are using a hand held radio connected to your node is this correct?

Stan

Sent from my iPhone

> On Apr 30, 2017, at 6:39 PM, Bryan St Clair via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Hello all,
> 
> I have a node on an HT that is getting a loop.
> 
> v1.5 full updates.
> Pi3
> 888 HT
> TSQL 107.2 on node HT
> Verizon MiFi connection.
> USB fob
> Battery pack or with battery eliminator
> 
> The sequence of events:
> 
> Take outside HT and simply key up the node with a *70.  Node is not
> connected to another node, local repeat only.
> 
> Node responds with repeat only message.  Tx drops.  The node will then TX
> again, for .5 second, no sounds drops and repeats this TX loop 2-5 times.
> When I am connected to a network, it can repeat as many as 15 times.
> (observed)
> 
> I have removed PL as a test, no change.
> 
> Before I wipe the SD to be sure I don't have a config issue I am not able
> to find, I wanted to ask here for ideas.
> 
> Thanks
> 
> -- 
> Bryan
> K6CBR
> Allstar Base: 43918
> Allstar Mobile: 43913
> www.k6cbr.us
> QRZ <http://www.qrz.com/db/K6CBR>
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org