[arm-allstar] TX loop

[Bryan St Clair]

A 888s, yes. This node if for mobile use for traveling.

On Sun, Apr 30, 2017 at 6:16 PM, Stanley Stanukinos <ka5iid at swbell.net>
wrote:

> Bryan, let me see if I am understanding you correctly. You are using a
> hand held radio connected to your node is this correct?
>
> Stan
>
> Sent from my iPhone
>
> > On Apr 30, 2017, at 6:39 PM, Bryan St Clair via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > Hello all,
> >
> > I have a node on an HT that is getting a loop.
> >
> > v1.5 full updates.
> > Pi3
> > 888 HT
> > TSQL 107.2 on node HT
> > Verizon MiFi connection.
> > USB fob
> > Battery pack or with battery eliminator
> >
> > The sequence of events:
> >
> > Take outside HT and simply key up the node with a *70.  Node is not
> > connected to another node, local repeat only.
> >
> > Node responds with repeat only message.  Tx drops.  The node will then TX
> > again, for .5 second, no sounds drops and repeats this TX loop 2-5 times.
> > When I am connected to a network, it can repeat as many as 15 times.
> > (observed)
> >
> > I have removed PL as a test, no change.
> >
> > Before I wipe the SD to be sure I don't have a config issue I am not able
> > to find, I wanted to ask here for ideas.
> >
> > Thanks
> >
> > --
> > Bryan
> > K6CBR
> > Allstar Base: 43918
> > Allstar Mobile: 43913
> > www.k6cbr.us
> > QRZ <http://www.qrz.com/db/K6CBR>
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>


-- 
Bryan
K6CBR
Allstar Base: 43918
Allstar Mobile: 43913
www.k6cbr.us
QRZ <http://www.qrz.com/db/K6CBR>