[arm-allstar] More on Zoiper on the iphone

[Mark Johnston]

Maybe it's only on Android?

On Sep 10, 2016 14:27, "Dave Miller via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Dave,
> I can't seem to find these setting you are talking about in Zoiper for
> iPhone?
> I would love to boost audio as well.
> The settings tab under Audio has 5 items
> Echo cancellation             set to software
> Automatic Gain Control    set to software
> 3 on off toggles
> Noise suppression software
> Dialpad sounds
> Ring while talking.
>
> Where is "Zoiper->Config->Audio" on a iphone.
>
> Thanks
> Dave
> VE7HR
>
>
> On Sat, Sep 10, 2016 at 2:11 PM, David McGough via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
>
>>
>> Hi Tom,
>>
>> Glad it's working.
>>
>> Since the volume level issue is with Zopier directly, Zopier would ideally
>> be the best place for a wider range volume adjustment method, rather than
>> Asterisk, in this scenario.
>>
>> For my curiosity, I just google'd some phrases similar to: "zopier low
>> volume" and low volume levels seem to be common complaints. Some comments
>> mention looking through the Zopier settings, such as:
>>
>> ..."There is a speaker gain option in Zoiper->Config->Audio, which you can
>> try. Another option in the same menu is the "Audio Driver". Speaker gain
>> should do the trick, but try both, do some tests with them to see which
>> will have better effect with your device."...
>>
>> 73, David KB4FXC
>>
>>
>>
>> On Sat, 10 Sep 2016, Tom Whiteside via arm-allstar wrote:
>>
>> > I was able to finally get Zoiper to properly register with my Allstar
>> node -
>> > the final piece of the puzzle was to change the iax.conf "host=" line to
>> > dynamic as the example code had to start with.   Got confused thinking
>> this
>> > should be an actual IP address given it was a public static IP address -
>> > that was WRONG!
>> >
>> >
>> >
>> > Still wishing I could raise the volume on the iPhone Zoiper app in
>> speaker
>> > mode.  (Not an issue with Bluetooth car usage.)  This link gives an
>> example
>> > of adding a volume statement to the dial definition in extensions.conf:
>> >
>> >
>> >
>> > http://www.withsupport.co.uk/wiki/increasing-sip-volume-free
>> pbxasteriskelast
>> > ixtrixbox
>> >
>> >
>> >
>> > exten => s,1,Set(VOLUME(TX)=4)            ;can be any integer from 0 to
>> 10
>> >
>> > exten => s,1,Set(VOLUME(RX)=4)            ;can be any integer from 0 to
>> 10
>> >
>> >
>> >
>> > Tried that but with asterisk -rvvv monitoring, it reports "VOLUME not
>> > registered" so looks like this is not supported in our version.
>> >
>> >
>> >
>> > Any ideas on this?
>> >
>> >
>> >
>> > Tom N5TW
>> >
>> >
>> >
>> >
>> >
>> >
>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2 web page - http://hamvoip.org
>>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160910/0e69b067/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot_20160910-144529.png
Type: image/png
Size: 823217 bytes
Desc: not available
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160910/0e69b067/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot_20160910-144438.png
Type: image/png
Size: 719698 bytes
Desc: not available
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160910/0e69b067/attachment-0003.png>