[arm-allstar] Radio interface question

Doug Crompton doug at crompton.com
Wed May 4 21:54:53 EST 2016


Jeff,

 This link might help it talks about the 5 pin connector. It looks like you will need to make some mods though.

http://www.nw7rg.org/downloads/maxtrac/Interfacing%20a%20MaxTrac%20or%20Radius%20M100%20%20M214%20%20M216%20series%20mobile%20to%20a%20repeater%20controller.pdf

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Wed, 4 May 2016 20:13:05 -0500
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Radio interface question
> From: arm-allstar at hamvoip.org
> CC: jeffcarlyle at windstream.net
> 
> Hello Group,
> 
> I have an older Motorola mobile radio that I would like to setup as a simplex node.  The radio is an M100 so it has the 5 pin connector on the back and not the 16.  My question is, can this be interfaced to a URI strictly through the mic jack as is, without bringing the COS to the jack?  Information on this is sparse at best.  I did see where someone said it could be done, but that was the only reference I have seen about it.  Is anyone else running a setup like this and does it work OK?
> 
> Thanks in advance for any replies.
> 
> Jeff KD0QCN 
> 
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160504/9774bb39/attachment.html>


More information about the arm-allstar mailing list