[arm-allstar] Echolink Sometimes Not Loading

[Doug Crompton]

Yes, the delay value is in /usr/local/etc/allstar.env

For the BBB it is set to 30 and for the RPi2 it has typically been set to 0. The BBB has more problems with no network at boot.

Network startup issues would greatly vary among users depending on many factors like provider, wireless/wired, dhcp/static, etc.

I am curious about all the startup issues. Do many people really boot the small boards on a daily basis? I would think that fixed locations would leave it running.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sun, 12 Jun 2016 10:06:14 -0500
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Echolink Sometimes Not Loading
From: arm-allstar at hamvoip.org
CC: wb5nfc at gmail.com

Or in the allstar.env file I'm betting?
John
On Sun, Jun 12, 2016 at 9:48 AM, Neil k8it via arm-allstar <arm-allstar at hamvoip.org> wrote:







I had the same issue and found a easy solution that works every time
Just change the default time from 0 to 30 in Allstar.rc 
 
 
 
 
Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 
KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink 
K8IT-L
WIRES-X K8IT 11479 Room 21479




From: Doug Crompton via arm-allstar 
Sent: Sunday, June 12, 2016 10:28 AM
To: ARM Allstar 
Cc: Doug 
Crompton 
Subject: Re: [arm-allstar] Echolink Sometimes Not 
Loading


I have not seen that 
issue here but then my systems are generally 24/7 with some having 300+ day up 
times. 

Database problems will cause echolink to error and not load. 
Perhaps there needs to be some more error detection there.

It also might 
be a port problem through the VPN? Echolink does require forwarded ports.  


73 
Doug
WA3DSP
http://www.crompton.com/hamradio



> Date: Sun, 12 Jun 2016 10:14:40 -0400
> To: arm-allstar at hamvoip.org
> 
Subject: Re: [arm-allstar] Echolink Sometimes Not Loading
> From: 
arm-allstar at hamvoip.org
> CC: kb4fxc at inttek.net
> 
> 
> 
Hi John,
> 
> I've noticed this issue with chan_echolink for a long 
time, even with old
> ACID boxes. I haven't really looked for the cause. 
On the echolink enabled
> boxes, after reboot, I just have a script to 
stop/start asterisk once it
> has been running for 1 minute.....I 
suspected the problem was perhaps
> caused by the lack of an echolink node 
database having been downloaded???
> Maybe???
> 
> 
> 
...Yeah, I know stopping/starting isn't an ideal solution! I'll put this
> 
on the list to look at.
> 
> 
> 73, David KB4FXC
> 

> 
> 
> 
> On Sun, 12 Jun 2016, John via arm-allstar 
wrote:
> 
> > Looking for some guidance on why Echolink might not 
load after node reboot
> > (or initial startup). This behavior does not 
happen all the time, only
> > sporadically. A "module load 
chan_echolink.so" starts echolink without
> > errors if it has not 
loaded at boot/reboot. I'm using a VPN on the node
> > with 
RPi2/RPi2-3_V1.02beta_Allstar.img.zip
> > 
> > Thanks for any 
suggestions.
> > 
> > John
> > 
> 
> 
_______________________________________________
> 
> arm-allstar 
mailing list
> arm-allstar at hamvoip.org
> 
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> 
Visit the BBB and RPi2 web page - http://hamvoip.org
> 






_______________________________________________

arm-allstar 
mailing 
list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit 
the BBB and RPi2 web page - http://hamvoip.org 






No virus found in this 
message.
Checked by AVG - www.avg.com
Version: 2016.0.7639 / Virus 
Database: 4598/12406 - Release Date: 06/12/16



_______________________________________________



arm-allstar mailing list

arm-allstar at hamvoip.org

http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar



Visit the BBB and RPi2 web page - http://hamvoip.org



_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160612/d1ef0e8e/attachment-0001.html>