[arm-allstar] TX Inhibit

Roselito de los Reyes tolitski at hotmail.com
Fri Feb 12 13:35:19 EST 2016


Hi David,
How does this "linktolink" configured in a "50 thousand" foot view?
Lito

> Date: Fri, 5 Feb 2016 02:35:26 -0500
> From: kb4fxc at inttek.net
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] TX Inhibit
> 
> 
> Hi Levi,
> 
> I'm not sure exactly how you have your remote-base configured.  However, 
> here are the important parts of a solution that works for me. This config 
> is for dedicated backbone link radios.
> 
> In rpt.conf:
> 
> [1111]		; Example node 1111, a simplex radio
> duplex=0
> linktolink=y
> hangtime=0
> althangtime=0
> 
> 
> [nodes]
> 1111 = radio at 127.0.0.1/1111,NONE,y      ; Sample simplex radio node
> 
> 
> 
> 73, David KB4FXC
> 
> 
> 
> On Thu, 4 Feb 2016, Levi C. Maaia wrote:
> 
> > Forgive me if this has been answered, I have searched the help docs and 
> how-tos as well as this list's archives but perhaps I am using the wrong 
> terminology. Â 
> > 
> > I am trying to setup a remote base and I have everything working 
> however, my remote base radio will not transmit if it is receiving a 
> carrier. Â That is, if I tune my remote base to a local repeater and then 
> connect to my node from the Allstar Web transceiver, I cannot transmit 
> into the repeater until the repeater's carrier drops completely and my 
> remote base radio is not longer detecting a carrier. Â It is as if there 
> is a TX inhibitor turned on and my remote base node will not allow 
> Allstar to switch to TX on my remote base radio unless there is silence 
> (either though squelch or CTCSS). Â Is there an option to permit Allstar 
> to switch to TX even if a receive carrier is detected?
> > 
> > Levi, K6LCM
> > 
> > 
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160212/88a537a8/attachment.html>


More information about the arm-allstar mailing list