[arm-allstar] TX Inhibit

Levi Maaia lee317 at maaia.com
Fri Feb 12 14:03:24 EST 2016


David,

Your configuration worked for me! Now my remote base is able to key up
after the courtesy tone but doesn't have to wait for the repeater it is
talking to, which has a long squelch tail, to drop carrier. Perfect!

LCM
On Feb 12, 2016 10:35 AM, "Roselito de los Reyes" <tolitski at hotmail.com>
wrote:

> Hi David,
>
> How does this "linktolink" configured in a "50 thousand" foot view?
>
> Lito
>
> > Date: Fri, 5 Feb 2016 02:35:26 -0500
> > From: kb4fxc at inttek.net
> > To: arm-allstar at hamvoip.org
> > Subject: Re: [arm-allstar] TX Inhibit
> >
> >
> > Hi Levi,
> >
> > I'm not sure exactly how you have your remote-base configured. However,
> > here are the important parts of a solution that works for me. This
> config
> > is for dedicated backbone link radios.
> >
> > In rpt.conf:
> >
> > [1111] ; Example node 1111, a simplex radio
> > duplex=0
> > linktolink=y
> > hangtime=0
> > althangtime=0
> >
> >
> > [nodes]
> > 1111 = radio at 127.0.0.1/1111,NONE,y ; Sample simplex radio node
> >
> >
> >
> > 73, David KB4FXC
> >
> >
> >
> > On Thu, 4 Feb 2016, Levi C. Maaia wrote:
> >
> > > Forgive me if this has been answered, I have searched the help docs
> and
> > how-tos as well as this list's archives but perhaps I am using the wrong
> > terminology. Â
> > >
> > > I am trying to setup a remote base and I have everything working
> > however, my remote base radio will not transmit if it is receiving a
> > carrier. Â That is, if I tune my remote base to a local repeater and
> then
> > connect to my node from the Allstar Web transceiver, I cannot transmit
> > into the repeater until the repeater's carrier drops completely and my
> > remote base radio is not longer detecting a carrier. Â It is as if there
> > is a TX inhibitor turned on and my remote base node will not allow
> > Allstar to switch to TX on my remote base radio unless there is silence
> > (either though squelch or CTCSS). Â Is there an option to permit Allstar
> > to switch to TX even if a receive carrier is detected?
> > >
> > > Levi, K6LCM
> > >
> > >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160212/ee262fb0/attachment.html>


More information about the arm-allstar mailing list