[arm-allstar] Rasberry PI3 wifi/wired connection confuses scripts

[Bryan St Clair]

Well, if you are hard wired, you can disable the WiFi.

If you are using WiFi, just don't connect an ethernet cable, and it won't
be used.

Works well for me, no issues with IP reporting.

K6CBR
43913

On Mon, Dec 12, 2016 at 9:12 PM, "Jeff Omundson via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello,
> I have a rasberry PI3 running allstar as a simplex node through an 888.  I
> don't know yet if I'll be using wireless or lan, but if they are both
> running it confuses scripts like sayip.sh which checks for a local network
> connection using the ip command but gets confused with two parameters (wan0
> and lan0).  I suppose the obvious obtion is to disable one or the other.
> I'm a bit of a newbie and am wondering if someone has come up with a more
> elegant solution.  Not that it has to be elegant...
>
> -Jeff
> KF7RPI
> Node 44216
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>



-- 
Bryan aka K6CBR
www.k6cbr.us
QRZ <http://www.qrz.com/db/K6CBR>