[arm-allstar] DTMF problem

[wade]

Oh also a note on this.
The trail is only noticeable when rpt.conf duplex=1.
If rpt.conf duplex=0, it goes away, but so does my telemetry.

Simple usb duplex=0 or 1 doesn't change anything.



On 08/21/2016 10:24 PM, Doug Crompton via arm-allstar wrote:
> Wade,
>
>  First of all where did your config files come from? Did you copy them 
> from somewhere else? The default hangtime is 100ms which is about 
> right for simplex. If you ran the default setup from the image you 
> would have all these things set properly. Not know how you got where 
> you are it is not clear what else might not be set correctly.
>
> One caution when starting a new image is that you should not blindly 
> copy config files from other versions of Allstar like Acid. Things 
> have changed and the setup does a good job of giving you a good 
> starting place.
>
> If setting althangtime and hangtime to 100 doe snot fix things for you 
> then something else has been changed or something else other than 
> Allstar is causing the problem.
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> > To: arm-allstar at hamvoip.org
> > Date: Sun, 21 Aug 2016 14:56:28 -0500
> > Subject: Re: [arm-allstar] DTMF problem
> > From: arm-allstar at hamvoip.org
> > CC: wadeo at charter.net
> >
> > Ok, the duplex set to 1 worked for the "replies". Now we just have a
> > hang time that we can't get rid of. (set hangtime and althangtime to 0)
> > Kind of makes everyone thing we are running a repeater on a simplex
> > channel. This will also mess with me when I do put mine through my
> > repeater.
> >
> > To answer the radios used email. We tried with a Motorola 1250, 2
> > different Yaesu FT1's, & Yaesu FT60. All with the same results. But 
> that
> > info is very good to know as we have hams around here that use those
> > rigs. Thanks!
> >
> > Wade
> > KC0MLT
> >
> >
> > On 08/20/2016 09:53 PM, David McGough via arm-allstar wrote:
> > >
> > > On Sat, 20 Aug 2016, wade via arm-allstar wrote:
> > >> Everything but the letter "D" shows up. I had him run the susb 
> tune and
> > >
> > > If you're using a UV5R, some versions had a firmware issue where they
> > > won't generate a DTMF "D" code, as I recall. But, all other keys 
> worked.
> > >
> > >
> > > 73, David KB4FXC
> > >
> > >
> > >
> > >> found the levels were way hot. So after some adjustment we got the RF
> > >> DTMF to work.
> > >>
> > >> Now that brought up another issue both of us have. When running the
> > >> node(s) in simplex we have no reply to functions like *73, *81, 
> *82, but
> > >> we have over the air replies to *70. This is probably just 
> something we
> > >> don't have set correctly but I have not been able to find it 
> since June
> > >> and now that he has this issue I think we should try to resolve it.
> > >>
> > >> These functions did operate correctly when my node was in duplex.
> > >>
> > >> Wade
> > >> KC0MLT
> > >>
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2 web page - http://hamvoip.org
> >
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160822/840461f6/attachment.html>