[arm-allstar] DTMF problem

[Doug Crompton]

Are you hearing a courtesy tone in the tail? If so at the beginning or end of the tail?
I presume you are registered with the forum but your emails have to be approved so they must not be coming from the same email you registered from.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


To: arm-allstar at hamvoip.org
Date: Mon, 22 Aug 2016 16:48:41 -0500
Subject: Re: [arm-allstar] DTMF problem
From: arm-allstar at hamvoip.org
CC: wadeo at charter.net


  
    
  
  
    Oh also a note on this. 

    The trail is only noticeable when rpt.conf duplex=1. 

    If rpt.conf duplex=0, it goes away, but so does my telemetry.

    

    Simple usb duplex=0 or 1 doesn't change anything.

    

    

    

    On 08/21/2016 10:24 PM, Doug Crompton
      via arm-allstar wrote:

    
    
      
      Wade,

          

           First of all where did your config files come from? Did you
          copy them from somewhere else? The default hangtime is 100ms
          which is about right for simplex. If you ran the default setup
          from the image you would have all these things set properly.
          Not know how you got where you are it is not clear what else
          might not be set correctly.

          

          One caution when starting a new image is that you should not
          blindly copy config files from other versions of Allstar like
          Acid. Things have changed and the setup does a good job of
          giving you a good starting place.
        

        If setting althangtime and hangtime to 100 doe snot fix things
        for you then something else has been changed or something else
        other than Allstar is causing the problem.

        

        73 Doug

          WA3DSP

          http://www.crompton.com/hamradio

        

        

        > To: arm-allstar at hamvoip.org

          > Date: Sun, 21 Aug 2016 14:56:28 -0500

          > Subject: Re: [arm-allstar] DTMF problem

          > From: arm-allstar at hamvoip.org

          > CC: wadeo at charter.net

          > 

          > Ok, the duplex set to 1 worked for the "replies". Now we
          just have a 

          > hang time that we can't get rid of. (set hangtime and
          althangtime to 0) 

          > Kind of makes everyone thing we are running a repeater on
          a simplex 

          > channel. This will also mess with me when I do put mine
          through my 

          > repeater.

          > 

          > To answer the radios used email. We tried with a Motorola
          1250, 2 

          > different Yaesu FT1's, & Yaesu FT60. All with the
          same results. But that 

          > info is very good to know as we have hams around here
          that use those 

          > rigs. Thanks!

          > 

          > Wade

          > KC0MLT

          > 

          > 

          > On 08/20/2016 09:53 PM, David McGough via arm-allstar
          wrote:

          > >

          > > On Sat, 20 Aug 2016, wade via arm-allstar wrote:

          > >> Everything but the letter "D" shows up. I had
          him run the susb tune and

          > >

          > > If you're using a UV5R, some versions had a firmware
          issue where they

          > > won't generate a DTMF "D" code, as I recall. But,
          all other keys worked.

          > >

          > >

          > > 73, David KB4FXC

          > >

          > >

          > >

          > >> found the levels were way hot. So after some
          adjustment we got the RF

          > >> DTMF to work.

          > >>

          > >> Now that brought up another issue both of us
          have. When running the

          > >> node(s) in simplex we have no reply to functions
          like *73, *81, *82, but

          > >> we have over the air replies to *70. This is
          probably just something we

          > >> don't have set correctly but I have not been
          able to find it since June

          > >> and now that he has this issue I think we should
          try to resolve it.

          > >>

          > >> These functions did operate correctly when my
          node was in duplex.

          > >>

          > >> Wade

          > >> KC0MLT

          > >>

          > > _______________________________________________

          > >

          > > arm-allstar mailing list

          > > arm-allstar at hamvoip.org

          > >
          http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

          > >

          > > Visit the BBB and RPi2 web page - http://hamvoip.org

          > 

          > _______________________________________________

          > 

          > arm-allstar mailing list

          > arm-allstar at hamvoip.org

          >
          http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

          > 

          > Visit the BBB and RPi2 web page - http://hamvoip.org

          > 

        
      
      

      
      

      _______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
    
    

  


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160822/f96d7637/attachment-0001.html>