[arm-allstar] bbb Initial setup

[Doug Crompton]

Ken,

 Glad to hear you got it going. The BBB code does not have Allmon installed.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


To: arm-allstar at hamvoip.org
Date: Sun, 24 Apr 2016 16:53:30 +0100
Subject: Re: [arm-allstar] bbb Initial setup
From: arm-allstar at hamvoip.org
CC: ken at mirlaw.co.uk


  
    
  
  
    Hi Doug,

    Yes I was using a monitor and keyboard.

    I must have been doing something wrong because after it rebooted I
    wasn't asked to log in it came straight up with the bbb-allstar
    prompt.

    

    I started again from scratch and got it right this time, everything
    is working. I just have the simpleusb to tune up now. Is Allmon 2
    built into this version?

    

    Thanks again

    Regards

    Ken

    G0LCE

    

    On 24/04/2016 15:19, Doug Crompton via
      arm-allstar wrote:

    
    
      
      Ken,

          

            Are you using a monitor and keyboard to login or logging in
          over ssh? When using ssh and it reboots you would always have
          to re-connect back in at the IP address and port. It would not
          automatically do that. In any case using the monitor or ssh
          you would need to re-log back in. The last instruction screen
          tells you to do that and reminds you to use the new password
          and IP address/port if changed.
        

        73 Doug

          WA3DSP

          http://www.crompton.com/hamradio

        

        

        
          To: arm-allstar at hamvoip.org

          Date: Sun, 24 Apr 2016 15:04:19 +0100

          Subject: Re: [arm-allstar] bbb Initial setup

          From: arm-allstar at hamvoip.org

          CC: ken at mirlaw.co.uk

          

          Hi Doug,

          No I didn't, I had it in my head that it would carry on with
          the script as I was sure the earlier scripts did.

          I have change the ip address to static and when I set up the
          ip address netmask and gateway, it then asked if I wanted to
          carry on with the node set up Y or N I typed Y and it
          rebooted.

          it then sits at the bbb-allstar prompt, not a login prompt

          

          I'll try it with putty

          

          Thanks 

          Ken g0lce

          

          On 24/04/2016 14:40, Doug
            Crompton via arm-allstar wrote:

          
          
            
            Ken,

                

                I am not sure what you mean by sits at the prompt. When
                it reboots you need to close that session in putty or
                whatever you are using and log back in at the NEW (if
                you changed anything at first setup) port and IP
                address. It will then continue the setup. Did you do
                that?
              

              73 Doug

                WA3DSP

                http://www.crompton.com/hamradio

              

              

              
                To: arm-allstar at hamvoip.org

                Date: Sun, 24 Apr 2016 13:50:53 +0100

                Subject: [arm-allstar] bbb Initial setup

                From: arm-allstar at hamvoip.org

                CC: ken at mirlaw.co.uk

                

                Hi,

                I'm upgrading to the latest version of the bbb software.

                I'm obviousy doing something wrong because running the
                initial setup I can get through the static/dchp setup
                but when it asks if I want to setup the node and I type
                Y it reboots and just sits at the bbb-allstar prompt

                Hoping someone can point me in the right direction

                

                Regards

                Ken

                g0lce

                

                
                  
                    
                      
                  
                  

                
                

                

                _______________________________________________
                arm-allstar mailing list arm-allstar at hamvoip.org
                http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
                Visit the BBB and RPi2 web page - http://hamvoip.org
            
            

            
            

            _______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
          
          

          

          _______________________________________________
          arm-allstar mailing list
          arm-allstar at hamvoip.org
          http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
          Visit the BBB and RPi2 web page - http://hamvoip.org
      
      

      
      

      _______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org
    
    

  


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160424/ff350a12/attachment-0001.html>