[arm-allstar] bbb Initial setup

[Ken Robinson]

Hi Doug,
Yes I was using a monitor and keyboard.
I must have been doing something wrong because after it rebooted I 
wasn't asked to log in it came straight up with the bbb-allstar prompt.

I started again from scratch and got it right this time, everything is 
working. I just have the simpleusb to tune up now. Is Allmon 2 built 
into this version?

Thanks again
Regards
Ken
G0LCE

On 24/04/2016 15:19, Doug Crompton via arm-allstar wrote:
> Ken,
>
>   Are you using a monitor and keyboard to login or logging in over 
> ssh? When using ssh and it reboots you would always have to re-connect 
> back in at the IP address and port. It would not automatically do 
> that. In any case using the monitor or ssh you would need to re-log 
> back in. The last instruction screen tells you to do that and reminds 
> you to use the new password and IP address/port if changed.
>
> *73 Doug
> WA3DSP
> http://www.crompton.com/hamradio*
>
>
> ------------------------------------------------------------------------
> To: arm-allstar at hamvoip.org
> Date: Sun, 24 Apr 2016 15:04:19 +0100
> Subject: Re: [arm-allstar] bbb Initial setup
> From: arm-allstar at hamvoip.org
> CC: ken at mirlaw.co.uk
>
> Hi Doug,
> No I didn't, I had it in my head that it would carry on with the 
> script as I was sure the earlier scripts did.
> I have change the ip address to static and when I set up the ip 
> address netmask and gateway, it then asked if I wanted to carry on 
> with the node set up Y or N I typed Y and it rebooted.
> it then sits at the bbb-allstar prompt, not a login prompt
>
> I'll try it with putty
>
> Thanks
> Ken g0lce
>
> On 24/04/2016 14:40, Doug Crompton via arm-allstar wrote:
>
>     Ken,
>
>     I am not sure what you mean by sits at the prompt. When it reboots
>     you need to close that session in putty or whatever you are using
>     and log back in at the NEW (if you changed anything at first
>     setup) port and IP address. It will then continue the setup. Did
>     you do that?
>
>     *73 Doug
>     WA3DSP
>     http://www.crompton.com/hamradio*
>
>
>     ------------------------------------------------------------------------
>     To: arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>     Date: Sun, 24 Apr 2016 13:50:53 +0100
>     Subject: [arm-allstar] bbb Initial setup
>     From: arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>     CC: ken at mirlaw.co.uk <mailto:ken at mirlaw.co.uk>
>
>     Hi,
>     I'm upgrading to the latest version of the bbb software.
>     I'm obviousy doing something wrong because running the initial
>     setup I can get through the static/dchp setup but when it asks if
>     I want to setup the node and I type Y it reboots and just sits at
>     the bbb-allstar prompt
>     Hoping someone can point me in the right direction
>
>     Regards
>     Ken
>     g0lce
>
>         ------------------------------------------------------------------------
>
>
>
>     _______________________________________________ arm-allstar
>     mailing list arm-allstar at hamvoip.org
>     <mailto:arm-allstar at hamvoip.org>
>     http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>     Visit the BBB and RPi2 web page - http://hamvoip.org
>
>
>     _______________________________________________
>
>     arm-allstar mailing list
>     arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>     http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>     Visit the BBB and RPi2 web page -http://hamvoip.org
>
>
>
> _______________________________________________ arm-allstar mailing 
> list arm-allstar at hamvoip.org 
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit 
> the BBB and RPi2 web page - http://hamvoip.org
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160424/b4ef1bf1/attachment.html>