[arm-allstar] Polycom SIP phone hangs up 32 seconds after nodestatus
Stanley Stanukinos
ka5iid at swbell.net
Thu Apr 14 15:51:00 EST 2016
Phil, no problem. Sometimes more data is better. Wireshark has caught things in my work world that uses SIP and RTP that were not behaving as expected.
Stan
Sent from my iPhone
> On Apr 14, 2016, at 3:41 PM, Phil Visalli via arm-allstar <arm-allstar at hamvoip.org> wrote:
>
> Stanley,
>
> I have not, but i just installed wireshark and will run a packet capture when i get home tonight if i have time (gotta finish my taxes d'oh!)...... otherwise i'll sit down to do some tinkering for sure tomorrow after work. I guess i didn't even think about doing a packet capture because I didn't think it was a network related issue. I thought i'd be able to get any debug info i needed from the asterisk console.
>
> Thanks for the nudge .... i'll report back when i get some more info
>
>
>> On Thu, Apr 14, 2016 at 1:00 PM, <arm-allstar-request at hamvoip.org> wrote:
>> Send arm-allstar mailing list submissions to
>> arm-allstar at hamvoip.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> or, via email, send a message with subject or body 'help' to
>> arm-allstar-request at hamvoip.org
>>
>> You can reach the person managing the list at
>> arm-allstar-owner at hamvoip.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of arm-allstar digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Polycom SIP phone hangs up 32 seconds after node status
>> (Phil Visalli)
>> 2. Re: Polycom SIP phone hangs up 32 seconds after node status
>> (Stanley Stanukinos)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Thu, 14 Apr 2016 11:26:09 -0400
>> From: Phil Visalli <phil at philv.net>
>> To: arm-allstar at hamvoip.org
>> Subject: [arm-allstar] Polycom SIP phone hangs up 32 seconds after
>> node status
>> Message-ID:
>> <CAAMk9h_hXSQ2URNXkFh5eL331BGdeJztLTdSiOHkGvLv_NrTFQ at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I know this might be a little bit outside the scope of this mailing list
>> but i figured I'd try and see if anyone can point me in the right direction.
>>
>> For starters, Im still running the RPi2 V1.0 version, but i dont think that
>> has anything to do with the problem im having.
>>
>> I've got 2 nodes, one radio node, and one hub node. One Polycom 550 SIP
>> phone and 2 sip softphone clients running on android devices. I've also
>> got autopatch set up using a gvoice number for a sip trunk. The three sip
>> extensions can call each other, call either allstar node, or use the gvoice
>> number to call out. Also, from the radio node I can use autopatch to dial
>> out on the gvoice line or "call" the polycom sip phone (*611 rings the
>> phone ext). Audio and all the call routing in all these scenarios works
>> great.
>>
>> Now to the problem. When i call from the Polycom to either of my two
>> nodes, the sip phone seems to be hanging up at what appeared to be random
>> intervals. After further testing I've figured out that its hanging up
>> about 30-32 seconds after the node does something like playing an ID or *70
>> to play node status. Watching the asterisk console I see this:
>>
>> -- <DAHDI/pseudo-672364238> Playing 'rpt/node' (language 'en') --
>> <DAHDI/pseudo-672364238> Playing 'digits/4' (language 'en') --
>> <DAHDI/pseudo-672364238> Playing 'digits/2' (language 'en') --
>> <DAHDI/pseudo-672364238> Playing 'digits/1' (language 'en') --
>> <DAHDI/pseudo-672364238> Playing 'digits/9' (language 'en') --
>> <DAHDI/pseudo-672364238> Playing 'digits/0' (language 'en') --
>> <DAHDI/pseudo-672364238> Playing 'rpt/repeat_only' (language 'en') --
>> Hungup 'DAHDI/pseudo-672364238'
>>
>> Which leads me to believe that the phone is seeing that "hungup" at the end
>> of the server status message and thinks that the call is over and therefore
>> it hangs up. Its worth mentioning that this ONLY happens on the polycom
>> phone and not on the softphone clients (zoiper). I've gone over all the
>> settings on the phone and nothing seems to change this behavior. I can be
>> passing audio back and forth for several min with no problem, but as soon
>> as I do something like *70, 30ish seconds later the polycom hangs up.
>>
>> While i'd love it if someone has an answer, id be happy to find out if
>> anyone has run into this before.... or if someone has a similar setup that
>> could discuss with me (either on the mailing list, offline or on the
>> radio). Im going to try to get my hands on another brand sip phone to see
>> if it happens on others too. Again, sorry if this is the wrong place for
>> this but it seems to be the most active allstar specific community so
>> hopefully no one minds me dropping my problem here :p
>>
>> Thanks
>>
>> Phil V
>> K2ELV
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160414/c4bad582/attachment-0001.html>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Thu, 14 Apr 2016 10:52:42 -0500
>> From: Stanley Stanukinos <ka5iid at swbell.net>
>> To: ARM Allstar <arm-allstar at hamvoip.org>
>> Subject: Re: [arm-allstar] Polycom SIP phone hangs up 32 seconds after
>> node status
>> Message-ID: <841D1E0C-0F5E-4F82-9A03-8602245BCE8E at swbell.net>
>> Content-Type: text/plain; charset="us-ascii"
>>
>> Phil, have you ran Wireshark and captured the data on the Lan to see what is going on?
>>
>> Stan
>>
>> Sent from my iPhone
>>
>> > On Apr 14, 2016, at 10:26 AM, Phil Visalli via arm-allstar <arm-allstar at hamvoip.org> wrote:
>> >
>> > I know this might be a little bit outside the scope of this mailing list but i figured I'd try and see if anyone can point me in the right direction.
>> >
>> > For starters, Im still running the RPi2 V1.0 version, but i dont think that has anything to do with the problem im having.
>> >
>> > I've got 2 nodes, one radio node, and one hub node. One Polycom 550 SIP phone and 2 sip softphone clients running on android devices. I've also got autopatch set up using a gvoice number for a sip trunk. The three sip extensions can call each other, call either allstar node, or use the gvoice number to call out. Also, from the radio node I can use autopatch to dial out on the gvoice line or "call" the polycom sip phone (*611 rings the phone ext). Audio and all the call routing in all these scenarios works great.
>> >
>> > Now to the problem. When i call from the Polycom to either of my two nodes, the sip phone seems to be hanging up at what appeared to be random intervals. After further testing I've figured out that its hanging up about 30-32 seconds after the node does something like playing an ID or *70 to play node status. Watching the asterisk console I see this:
>> >
>> > -- <DAHDI/pseudo-672364238> Playing 'rpt/node' (language 'en')
>> > -- <DAHDI/pseudo-672364238> Playing 'digits/4' (language 'en')
>> > -- <DAHDI/pseudo-672364238> Playing 'digits/2' (language 'en')
>> > -- <DAHDI/pseudo-672364238> Playing 'digits/1' (language 'en')
>> > -- <DAHDI/pseudo-672364238> Playing 'digits/9' (language 'en')
>> > -- <DAHDI/pseudo-672364238> Playing 'digits/0' (language 'en')
>> > -- <DAHDI/pseudo-672364238> Playing 'rpt/repeat_only' (language 'en')
>> > -- Hungup 'DAHDI/pseudo-672364238'
>> >
>> > Which leads me to believe that the phone is seeing that "hungup" at the end of the server status message and thinks that the call is over and therefore it hangs up. Its worth mentioning that this ONLY happens on the polycom phone and not on the softphone clients (zoiper). I've gone over all the settings on the phone and nothing seems to change this behavior. I can be passing audio back and forth for several min with no problem, but as soon as I do something like *70, 30ish seconds later the polycom hangs up.
>> >
>> > While i'd love it if someone has an answer, id be happy to find out if anyone has run into this before.... or if someone has a similar setup that could discuss with me (either on the mailing list, offline or on the radio). Im going to try to get my hands on another brand sip phone to see if it happens on others too. Again, sorry if this is the wrong place for this but it seems to be the most active allstar specific community so hopefully no one minds me dropping my problem here :p
>> >
>> > Thanks
>> >
>> > Phil V
>> > K2ELV
>> > _______________________________________________
>> >
>> > arm-allstar mailing list
>> > arm-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >
>> > Visit the BBB and RPi2 web page - http://hamvoip.org
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160414/bb544a0a/attachment-0001.html>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>>
>> ------------------------------
>>
>> End of arm-allstar Digest, Vol 23, Issue 16
>> *******************************************
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20160414/330940a2/attachment.html>
More information about the arm-allstar
mailing list