[arm-allstar] second node startup problem

[Neil k8it]

Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root at KITLINK ~]#
the output of lsusb

Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479


From: Doug Crompton 
Sent: Monday, July 27, 2015 11:05 PM
To: ARM Allstar 
Subject: Re: [arm-allstar] second node startup problem


What do you mean by the functions section? There is one functions section called functions<node> where node is the FIRST node. So both nodes use the same functions. You can change to a separate functions stanza for the second node if you like but normally you use one for both.

The only thing I can tell you is if you follow the directions exactly it does work. You can't plug in the second USB until it tells you to and you restart. Since I have no way of knowing what you did it would be hard to troubleshoot remotely.

Not showing up in the active node list at Allstarlink is not a good indication of whether things are working since sometimes nodes don't show up there. It looks like it is not seeing the second USB.

When you did a tune save on usb1 it said not active. Does the second USB show up in lsusb?  

73 Doug
WA3DSP
http://www.crompton.com/hamradio




--------------------------------------------------------------------------------
From: k8it at cac.net
To: arm-allstar at hamvoip.org
Date: Mon, 27 Jul 2015 22:27:00 -0400
Subject: [arm-allstar] second node startup problem


following the instructions on page 10 of setting up a second node for raspberry pi, I was able to use susb active usb and then use susb tune usb successfully. then I edited the iax.conf, extensions.conf and rpt.conf files successfully. rpt.conf is still missing the FUNCTION stanza for the second node since the instructions did not add that yet.
I then used astdn.sh and astup.sh to reboot asterisk. next I tried the following but got this error. my primary node 41838 still works but my new node 42087 does not show up in the active node listing.  Any suggestions on how to fix this?

Connected to Asterisk  currently running on KITLINK (pid = 6136)
Verbosity is at least 3
  == Refreshing DNS lookups.
KITLINK*CLI> susb active usb1
KITLINK*CLI> susb tune save
Device usb1 currently not active

and the following for reference only. my primary node is called usb and my second node is called usb1

KITLINK*CLI> susb active usb
KITLINK*CLI>

Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479




_______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page - http://hamvoip.org


--------------------------------------------------------------------------------


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 


--------------------------------------------------------------------------------


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6081 / Virus Database: 4392/10319 - Release Date: 07/27/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150727/82b81f98/attachment.html>