[arm-allstar] second node startup problem

[Doug Crompton]

I see no usb FOB listed.

A BBB with one DMK URI -

[root at Abington-40879 local]# lsusb
Bus 002 Device 006: ID 0d8c:013a C-Media Electronics, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

A RPi2 with two modified FOBs -

[root at alarmpi local]# lsusb
Bus 001 Device 005: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 001 Device 004: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: k8it at cac.net
To: arm-allstar at hamvoip.org
Date: Mon, 27 Jul 2015 23:49:40 -0400
Subject: Re: [arm-allstar] second node startup problem








Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 
Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root 
hub
[root at KITLINK ~]#
the output of lsusb
 
Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 
KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink 
K8IT-L
WIRES-X K8IT 11479 Room 21479




From: Doug Crompton 
Sent: Monday, July 27, 2015 11:05 PM
To: ARM Allstar 
Subject: Re: [arm-allstar] second node startup 
problem


What do you mean by the 
functions section? There is one functions section called functions<node> 
where node is the FIRST node. So both nodes use the same functions. You can 
change to a separate functions stanza for the second node if you like but 
normally you use one for both.

The only thing I can tell you is if you 
follow the directions exactly it does work. You can't plug in the second USB 
until it tells you to and you restart. Since I have no way of knowing what you 
did it would be hard to troubleshoot remotely.

Not showing up in the 
active node list at Allstarlink is not a good indication of whether things are 
working since sometimes nodes don't show up there. It looks like it is not 
seeing the second USB.

When you did a tune save on usb1 it said not 
active. Does the second USB show up in lsusb?  
73 
Doug
WA3DSP
http://www.crompton.com/hamradio





From: k8it at cac.net
To: arm-allstar at hamvoip.org
Date: Mon, 27 Jul 2015 
22:27:00 -0400
Subject: [arm-allstar] second node startup problem




following the instructions on page 10 of setting up a second node for 
raspberry pi, I was able to use susb active usb and then use susb tune usb 
successfully. then I edited the iax.conf, extensions.conf and rpt.conf files 
successfully. rpt.conf is still missing the FUNCTION stanza for the second node 
since the instructions did not add that yet.
I then used astdn.sh and astup.sh to reboot asterisk. next I tried the 
following but got this error. my primary node 41838 still works but my new node 
42087 does not show up in the active node listing.  Any suggestions on how 
to fix this?
 
Connected to Asterisk  currently running on KITLINK (pid = 
6136)
Verbosity is at least 3
  == Refreshing DNS 
lookups.
KITLINK*CLI> susb active usb1
KITLINK*CLI> susb tune 
save
Device usb1 currently not active

and the following for reference only. my primary node is called usb and my 
second node is called usb1
 
KITLINK*CLI> susb active usb
KITLINK*CLI>
 
Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 
KITLINK
Allstar Node 42087 KITLINK
IRLP Node exp0068
Echolink 
K8IT-L
WIRES-X K8IT 11479 Room 21479



 
_______________________________________________ 
arm-allstar mailing list arm-allstar at hamvoip.org 
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and 
RPi2 web page - http://hamvoip.org





_______________________________________________

arm-allstar 
mailing 
list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit 
the BBB and RPi2 web page - http://hamvoip.org 






No virus found in this 
message.
Checked by AVG - www.avg.com
Version: 2015.0.6081 / Virus 
Database: 4392/10319 - Release Date: 07/27/15

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150728/79cda683/attachment-0001.html>