[arm-allstar] *7 commands

[Corey Dean]

Anyone can change the codes to what they wish.  All someone needs to do is look up the cop command in the src and they can make the dtmf whatever they wish.  For example, I change 73 to disconnect all.  That makes more sense to my uses than anything else since 73 means goodbye.  A double beep just means that the code was accepted.  

Even the double beep can be changed.  Mine actually calls a ulaw file that says ok as a few repeaters in the areas use double beeps for courtesy tones and it can get a little confusing if the remote base is up and they here that.  

The whole system can be built the way you want it to work.  There is no set standard so to speak.  I think the only standard stuff on mine is 1,2,3 and 4.  Everything else has been changed for control reasons.

Corey. n3fe

> On Jul 11, 2015, at 6:02 PM, Neil k8it <k8it at cac.net> wrote:
> 
> Doug the way the code was released *71 only gives a user a double beep with no disconnected nodes. Please explain what this command is to do, since this is the first time someone said the commands changed without documenting the 5 w 's. I checked my email files and when I asked a similar question on the list I received 2 replies telling me about this error! Sorry I am just stating the facts from a user standpoint and documenting what works from a user perspective.
> Thanks
> 73 Neil Sablatzky  K8IT
> Allstar Node 41838 KITLINK
> Allstar Node 42087 KITLINK HUB
> IRLP Node exp0068
> Echolink K8IT-L
> 
> From: Doug Crompton
> Sent: Saturday, July 11, 2015 12:27 AM
> To: ARM Allstar
> Subject: Re: [arm-allstar] *7 commands
> 
> Neil,
> 
>  You are giving out bad info. That is NOT a mistake. The coding as delivered on the RPi2 and BBB is different in a couple of commands then Acid. Anyone has the right to change it to whatever they want but the way it is was intended.
> 
> *76 is disconnect all
> *71 / *73  is dis/connect permanent
> 
> The entire list of commands are at:
> 
>  http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/allstar_functions.pdf
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> From: k8it at cac.net
> To: arm-allstar at hamvoip.org
> Date: Fri, 10 Jul 2015 22:27:58 -0400
> Subject: Re: [arm-allstar] *7 commands
> 
> there was an error in the function stanza in rpt.conf. *71 is assigned to the wrong ilink or cop number. I am not home right now so I cant look it up for you until late tommorow
>  
>  
> Thanks
> 73 Neil Sablatzky  K8IT
> Allstar Node 41838 KITLINK
> Allstar Node 42087 KITLINK HUB
> IRLP Node exp0068
> Echolink K8IT-L
> 
> From: wt9s at me.com
> Sent: Friday, July 10, 2015 9:47 PM
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] *7 commands
> 
> I'm running 1.21 on a BBB with a URI. It's interfaced to my repeater via an Arcom RC 210 controller. Everything works well except the *7 commands. *70 works but none of the others do. I've watched using asterisk -rvvv and all the digits decode but I get no response. They are in the rpt.conf file. I'd really like it if *71 would work! Any ideas?
> 
> 
> Thanks!
> 
> --
> Jay Freeman - WT9S
> 
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org 
> 
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.6081 / Virus Database: 4392/10200 - Release Date: 07/10/15
> 
> 
> _______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.6081 / Virus Database: 4392/10208 - Release Date: 07/11/15
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2 web page - http://hamvoip.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150711/5ba410f0/attachment-0001.html>