[arm-allstar] *7 commands

[Neil k8it]

Doug the way the code was released *71 only gives a user a double beep with no disconnected nodes. Please explain what this command is to do, since this is the first time someone said the commands changed without documenting the 5 w 's. I checked my email files and when I asked a similar question on the list I received 2 replies telling me about this error! Sorry I am just stating the facts from a user standpoint and documenting what works from a user perspective.
Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L



From: Doug Crompton 
Sent: Saturday, July 11, 2015 12:27 AM
To: ARM Allstar 
Subject: Re: [arm-allstar] *7 commands


Neil,

 You are giving out bad info. That is NOT a mistake. The coding as delivered on the RPi2 and BBB is different in a couple of commands then Acid. Anyone has the right to change it to whatever they want but the way it is was intended.

*76 is disconnect all
*71 / *73  is dis/connect permanent

The entire list of commands are at:

 http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/allstar_functions.pdf

73 Doug
WA3DSP
http://www.crompton.com/hamradio




--------------------------------------------------------------------------------
From: k8it at cac.net
To: arm-allstar at hamvoip.org
Date: Fri, 10 Jul 2015 22:27:58 -0400
Subject: Re: [arm-allstar] *7 commands


there was an error in the function stanza in rpt.conf. *71 is assigned to the wrong ilink or cop number. I am not home right now so I cant look it up for you until late tommorow


Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L



From: wt9s at me.com 
Sent: Friday, July 10, 2015 9:47 PM
To: arm-allstar at hamvoip.org 
Subject: [arm-allstar] *7 commands


I'm running 1.21 on a BBB with a URI. It's interfaced to my repeater via an Arcom RC 210 controller. Everything works well except the *7 commands. *70 works but none of the others do. I've watched using asterisk -rvvv and all the digits decode but I get no response. They are in the rpt.conf file. I'd really like it if *71 would work! Any ideas?


Thanks!

--
Jay Freeman - WT9S


--------------------------------------------------------------------------------

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 

--------------------------------------------------------------------------------


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6081 / Virus Database: 4392/10200 - Release Date: 07/10/15


_______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2 web page - http://hamvoip.org


--------------------------------------------------------------------------------


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 


--------------------------------------------------------------------------------


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6081 / Virus Database: 4392/10208 - Release Date: 07/11/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150711/4ca82957/attachment.html>