[arm-allstar] dtmf macros for repeater control

[Robert Conklin]

Thanks Doug, that was valuable information which I will put to use.
However my current need is similar to that which what Dr. Schreuder
described. I did not adequately explain, will try again. Thanks a million
for your patience!
I wish to transmit DTMF thru RF from my node Rpi and radio to our local
repeater's Arcom controller, commands which will alter the repeater's
behavior.
What I think would be ideal is a capability to execute a macro command from
say the telephone access portal or a ""rpt fun node *xx" thru ssh that
would initiate a macro that would make my node key its radio and output
predetermined dtmf commands via RF. For instance commands telling the local
VHF repeater controller to connect/disconnect or monitor one of it's UHF
link radio ports to the main VHF repeater port.
The link radio I am using on my node is not capable of storing or executing
dtmf macros.

Thank you!

Rob Conklin
N4WGY

On Sun, Dec 27, 2015 at 12:52 PM, Willem Schreuder <willem at prinmath.com>
wrote:

> Doug I have a similar situation that I was never able to solve.  I have an
> SCOM controller on the far side of an AllStar link.  The only way to
> program the SCOM is to send it DTMF tones.  What I would like to do is key
> in the tones over RF, transmit them along the allstar link, and have the
> remote node put them out to the SCOM which is connected to the URIx.  I
> fooled with propagate_dtmf but never could make it work.  Is there a way to
> just pass the tones all the way through?
>
> ================================================================
> Dr. Willem A. Schreuder,  President,  Principia Mathematica
> Address:  445 Union Blvd, Suite 230,  Lakewood, CO  80228, USA
> Tel: (303) 716-3573   Fax: (303) 716-3575
> WWW: www.prinmath.com   Email: Willem.Schreuder at prinmath.com
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151227/8f587782/attachment.html>