[arm-allstar] Allstar Newbie

[Robert Conklin]

Thank you for that Doug,
Am getting audio from the URI to the radio, but do not appear to be getting
audio from the radio to the URI. Verified with a scope that the audio from
the radio is getting to pin 21 on the URI, but not seeing it on
simpleusb-tune-menu item 2.
Getting close with some help!

-Rob
N4WGY

On Tue, Dec 1, 2015 at 12:02 AM, Doug Crompton <doug at crompton.com> wrote:

>
> Robert,
>
>  I went back and looked at your original message. The RPi2 images uses
> simpleusb not usbradio. You need to use simpleusb-tune-menu to set audio
> levels.  Simpleusb uses  COS, PTT, audio in and audio out to your radio.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Mon, 30 Nov 2015 22:37:17 -0600
> From: n4wgy.ham at gmail.com
> To: arm-allstar at hamvoip.org
> Subject: Re: [arm-allstar] Allstar Newbie
>
>
> Hi Doug, got the image installed & went thru the setup while reading along
> your setup guide. Still having same problems so am quite convinced it is
> something simple I am overlooking.
>
> -Rob
>
> On Mon, Nov 30, 2015 at 10:13 PM, Robert Conklin <n4wgy.ham at gmail.com>
> wrote:
>
> Fair enough! Am downloading and installing the RPi_V1.0 image now.
> Will let you know how it goes. Thank you for responding so fast and fo the
> nice welcome.
>
> -Rob
>
> On Mon, Nov 30, 2015 at 9:40 PM, Doug Crompton <doug at crompton.com> wrote:
>
> Rob,
>
>  Welcome to Allstar. Unfortunately this email list is not for that
> release. Our release is at hamvoip.org and I think you will find it a
> better and soon with our next update a much improved release. It is very
> easy to install. If you want to continue with the release you are using
> then the app_rpt list is the one you want.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Mon, 30 Nov 2015 21:26:43 -0600
> From: n4wgy.ham at gmail.com
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Allstar Newbie
>
>
> Greetings to the forum.
> My name is Rob I am very new to Allstar Link and have some questions
> regarding the setup of my first server/node. Any and all help and advise
> will be hugely and genuinely appreciated!
>
> Setup:
> Rpi 2 running the Rpi2_dial image
> URIx interface (no eeprom) to an FT-7800.
> port forwarding 4569 UDP and 222 TCP
>
> When I run "radio-tune-menu", audio is getting thru the radio in both
> directions.
>
> When I go to the web transceiver to test I cannot connect
> When I try to send dtmf to the node radio I get no response.
>
> Am sure its something simple and obvious, probably a loose nut between my
> headsets.
> Thanks again for any advise! I will happily answer any questions to help
> zero in on a solution.
>
> Sincerely,
> Rob Conklin
> N4WGY
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
>
>
>
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB and RPi2 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151201/b156e026/attachment-0001.html>