[arm-allstar] Allstar Newbie

[Doug Crompton]

Rob,

Do you have a valid COS signal to the URI from the radio?  What radio are you using? If in /etc/asterisk/simpleusb.conf the item carrierfrom=usb  then you need a high (>2v) at pin 8 of the URI on a valid RX signal and if carrierfrom=usbinvert you need close to 0V at pin 8 (at least less than .5v) on a valid RX signal.

I would be glad to talk to you on the phone or maybe echolink (WA3DSP-L) if that would help
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Tue, 1 Dec 2015 07:37:35 -0600
From: n4wgy.ham at gmail.com
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Allstar Newbie

Thank you for that Doug, Am getting audio from the URI to the radio, but do not appear to be getting audio from the radio to the URI. Verified with a scope that the audio from the radio is getting to pin 21 on the URI, but not seeing it on simpleusb-tune-menu item 2.Getting close with some help!
-RobN4WGY
On Tue, Dec 1, 2015 at 12:02 AM, Doug Crompton <doug at crompton.com> wrote:




Robert,

 I went back and looked at your original message. The RPi2 images uses simpleusb not usbradio. You need to use simpleusb-tune-menu to set audio levels.  Simpleusb uses  COS, PTT, audio in and audio out to your radio. 

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Mon, 30 Nov 2015 22:37:17 -0600
From: n4wgy.ham at gmail.com
To: arm-allstar at hamvoip.org
Subject: Re: [arm-allstar] Allstar Newbie

Hi Doug, got the image installed & went thru the setup while reading along your setup guide. Still having same problems so am quite convinced it is something simple I am overlooking.
-Rob
On Mon, Nov 30, 2015 at 10:13 PM, Robert Conklin <n4wgy.ham at gmail.com> wrote:
Fair enough! Am downloading and installing the RPi_V1.0 image now.Will let you know how it goes. Thank you for responding so fast and fo the nice welcome.
-Rob
On Mon, Nov 30, 2015 at 9:40 PM, Doug Crompton <doug at crompton.com> wrote:



Rob,

 Welcome to Allstar. Unfortunately this email list is not for that release. Our release is at hamvoip.org and I think you will find it a better and soon with our next update a much improved release. It is very easy to install. If you want to continue with the release you are using then the app_rpt list is the one you want. 

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Mon, 30 Nov 2015 21:26:43 -0600
From: n4wgy.ham at gmail.com
To: arm-allstar at hamvoip.org
Subject: [arm-allstar] Allstar Newbie

Greetings to the forum.My name is Rob I am very new to Allstar Link and have some questions regarding the setup of my first server/node. Any and all help and advise will be hugely and genuinely appreciated!
Setup:Rpi 2 running the Rpi2_dial imageURIx interface (no eeprom) to an FT-7800.port forwarding 4569 UDP and 222 TCP
When I run "radio-tune-menu", audio is getting thru the radio in both directions.
When I go to the web transceiver to test I cannot connectWhen I try to send dtmf to the node radio I get no response.
Am sure its something simple and obvious, probably a loose nut between my headsets.Thanks again for any advise! I will happily answer any questions to help zero in on a solution.
Sincerely,Rob ConklinN4WGY

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  

_______________________________________________



arm-allstar mailing list

arm-allstar at hamvoip.org

http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar



Visit the BBB and RPi2 web page - http://hamvoip.org





_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  

_______________________________________________



arm-allstar mailing list

arm-allstar at hamvoip.org

http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar



Visit the BBB and RPi2 web page - http://hamvoip.org



_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20151201/0a5d3b4b/attachment.html>