[arm-allstar] TX level in simpleusb-tune-menu

[Neil k8it]

To make suggestions on how to fix your issue we still need to know the RX LEVEL     Some times people over drive the rx level which can be one of several root causes for your problem. Also does DTMF decoding work? 


Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479


From: KD8USF 
Sent: Sunday, August 30, 2015 12:24 PM
To: Neil Sablatzky ; ARM Allstar 
Subject: Re: [arm-allstar] TX level in simpleusb-tune-menu


The A level is set to 450, B level 500, no Pre or De,. I have audio configured for A and B is off but I tried adjusting both of them and no change. Not using rxboost, or txboost. The RX adjustment works just fine...




--------------------------------------------------------------------------------
From: Neil Sablatzky <k8it at cac.net>
To: KD8USF <kd8usf at yahoo.com>; ARM Allstar <arm-allstar at hamvoip.org> 
Sent: Sunday, August 30, 2015 8:50 AM
Subject: Re: [arm-allstar] TX level in simpleusb-tune-menu



 Andrew I have been through this several times myself first question what is your receive level your transmit a level and your transmit b  level if you hit option P you'll get them also is rxboost turned on or off and are you using any Pre or De  emphasis settings?
73 Neil K8IT

Sent from my iPhone




On Aug 30, 2015, at 4:31 AM, KD8USF <kd8usf at yahoo.com> wrote:


  I think i've seen something about this before but I wanted to slightly reduce the TX level a bit, and using menu option 3 I lowered it some and no change. I lowered it some more and no change. So I lowered it way down and still same audio level. Audio is on source A. The RX level works just fine but the TX level does nothing. I did however discover that alsamixer will change the TX level. Am I missing something here? The node is running on a Pi2.
  Thanks.
  Andrew.

  _______________________________________________

  arm-allstar mailing list
  arm-allstar at hamvoip.org
  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

  Visit the BBB and RPi2 web page - http://hamvoip.org



No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6125 / Virus Database: 4409/10545 - Release Date: 08/30/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150830/1676bd44/attachment.html>