[arm-allstar] TX level in simpleusb-tune-menu

[KD8USF]

The A level is set to 450, B level 500, no Pre or De,. I have audio configured for A and B is off but I tried adjusting both of them and no change. Not using rxboost, or txboost. The RX adjustment works just fine... 
      From: Neil Sablatzky <k8it at cac.net>
 To: KD8USF <kd8usf at yahoo.com>; ARM Allstar <arm-allstar at hamvoip.org> 
 Sent: Sunday, August 30, 2015 8:50 AM
 Subject: Re: [arm-allstar] TX level in simpleusb-tune-menu
   
 Andrew I have been through this several times myself first question what is your receive level your transmit a level and your transmit b  level if you hit option P you'll get them also is rxboost turned on or off and are you using any Pre or De  emphasis settings?73 Neil K8IT

Sent from my iPhone


On Aug 30, 2015, at 4:31 AM, KD8USF <kd8usf at yahoo.com> wrote:


I think i've seen something about this before but I wanted to slightly reduce the TX level a bit, and using menu option 3 I lowered it some and no change. I lowered it some more and no change. So I lowered it way down and still same audio level. Audio is on source A. The RX level works just fine but the TX level does nothing. I did however discover that alsamixer will change the TX level. Am I missing something here? The node is running on a Pi2.Thanks.Andrew.


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2 web page - http://hamvoip.org


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20150830/60552caa/attachment-0001.html>